1. General description

The 74HC40103 is an 8-bit synchronous down counter. It has control inputs for enabling

or disabling the clock (CP), for clearing the counter to its maximum count and for

presetting the counter either synchronously or asynchronously. In normal operation, the

counter is decremented by one count on each positive-going transition of the clock (CP).

Counting is inhibited when the terminal enable input (TE) is HIGH. The terminal count

output (TC) goes LOW when the count reaches zero if TE is LOW, and remains LOW for

one full clock period. When the synchronous preset enable input (PE) is LOW, data at the

jam input (P0 to P7) is clocked into the counter on the next positive-going clock transition

regardless of the state of TE. When the asynchronous preset enable input (PL) is LOW,

data at the jam input (P0 to P7) is asynchronously forced into the counter regardless of

the state of PE, TE, or CP. The jam inputs (P0 to P7) represent a single 8-bit binary word.

When the master reset input (MR) is LOW, the counter is asynchronously cleared to its

maximum count (decimal 255) regardless of the state of any other input. If all control

inputs except TE are HIGH at the time of zero count, the counters will jump to the

maximum count, giving a counting sequence of 256 clock pulses long. Device may be

cascaded using the TE input and the TC output, in either a synchronous or ripple mode.

Inputs include clamp diodes. This enables the use of current limiting resistors to interface

inputs to voltages in excess of VCC.

2. Features and benefits

 Cascadable

 Synchronous or asynchronous preset

 Low-power dissipation

 Complies with JEDEC standard no. 7A

 CMOS input levels

 ESD protection:

 HBM JESD22-A114F exceeds 2000 V

 MM JESD22-A115-A exceeds 200 V

 Multiple package options

 Specified from 40 C to +80 C and from 40 C to +125 C

3. Applications

 Divide-by-n counters

 Programmable timers

 Interrupt timers

 Cycle/program counters.

74HC40103PW属于集成电路（IC） > 计数器，除法器。安世半导体(中国)有限公司制造生产的74HC40103PW计数器，除法器计数器和除法器 IC 是数字逻辑器件，可对输入发生的逻辑转换进行计数，然后使用多个并行输出重新发送累加的计数，和/或生成单个输出信号转换，从而对应用某些整数数量输入信号转换进行响应。除了简单的事件计数，它们还可用于各种频率合成应用。