1. General description

The 74HC368; 74HCT368 is a hex inverting buffer/line driver with 3-state outputs controlled by

the output enable inputs (nOE). A HIGH on nOE causes the outputs to assume a high impedance

OFF-state. Inputs include clamp diodes enable the use of current limiting resistors to interface

inputs to voltages in excess of VCC.

2. Features and benefits

• Wide supply voltage range from 2.0 to 6.0 V

• Input levels:

• For 74HC368: CMOS level

• For 74HCT368: TTL level

• CMOS low power dissipation

• High noise immunity

• Inverting 3-state outputs

• Complies with JEDEC standards

• JESD8C (2.7 V to 3.6 V)

• JESD7A (2.0 V to 6.0 V)

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V

• Specified from -40 °C to +85 °C and -40 °C to +125 °C

74HC368D属于集成电路（IC） > 缓冲器，驱动器，接收器，收发器。安世半导体(中国)有限公司制造生产的74HC368D缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。