1. General description

The 74AUP1T17 provides the single buffer function. This device ensures a very low static and

dynamic power consumption across the entire VCC range from 2.3 V to 3.6 V.

The 74AUP1T17 is designed for logic-level translation applications with input switching levels that

accept 1.8 V low-voltage CMOS signals, while operating from either a single 2.5 V or 3.3 V supply

voltage.

The wide supply voltage range ensures normal operation as battery voltage drops from 3.6 V to

2.3 V.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry

disables the output, preventing the damaging backflow current through the device when it is

powered down.

Schmitt trigger inputs make the circuit tolerant to slower input rise and fall times across the entire

VCC range.

2. Features and benefits

• Wide supply voltage range from 2.3 V to 3.6 V

• High noise immunity

• ESD protection:

• HBM JESD22-A114F Class 3A exceeds 5000 V

• CDM JESD22-C101E exceeds 1000 V

• Low static power consumption; ICC = 1.5 μA (maximum)

• Latch-up performance exceeds 100 mA per JESD 78 Class II

• Inputs accept voltages up to 3.6 V

• Low noise overshoot and undershoot < 10 of VCC

• IOFF circuitry provides partial power-down mode operation

• Specified from -40 °C to +85 °C and -40 °C to +125 °C

74AUP1T17GX属于集成电路（IC） > 缓冲器，驱动器，接收器，收发器。安世半导体(中国)有限公司制造生产的74AUP1T17GX缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。