74ACT11373中文资料具有三态输出的八路透明 D 型锁存器数据手册TI规格书

描述 Description

This 8-bit latch features 3-state outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.The eight latches of the 74ACT11373 are transparent D-type latches. While the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When the enable is taken low, the Q outputs are latched at the levels that were set up at the D inputs. A buffered output-enableinput can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impendance third state and increased drive provide the capability to drive the bus lines in a bus-organized system without need for interface or pullup components. does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are off.The 74ACT11373 is characterized for operation from -40°C to 85°C.  

特性 Features

• Eight Latches in a Single Package
• Full Parallel Access for Loading
• Inputs Are TTL-Voltage Compatible
• Center-Pin VCC and GND Configurations Minimize High-Speed Switching Noise
• 500-mA Typical Latch-Up Immunity at 125°C
• Package Options Include Plastic Small-Outline (DW) and Shrink Small-Outline (DB) Packages, and Standard Plastic 300-mil DIPs (NT)
  EPIC is a trademark of Texas Instruments Incorporated.