General:

• This electronic component is designed and manufactured for use in general electronic equipment.

• Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any

equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control,

ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are

especially required and/or if there is the possibility of direct damage or human injury.

• Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.

• The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions

specified in the datasheet are not met, the wire insulation may be damaged or dissolved.

• Do not drop or impact the components, the component may be damaged.

• Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth

Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and

sustainability over time.

• The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the

authority of the customer. All technical specifications for standard products also apply to customer specific products.

749600010属于变压器 > 脉冲变压器。伍尔特集团制造生产的749600010脉冲变压器脉冲变压器用于从电路的一端向另一端传输脉冲（信号/电压先快速上升，保持恒定一段时间后快速下降）。变压器类型有 ADSL、数据/语音耦合、经济型开放式、栅极驱动、通用、HDBase-T、HDSL、接口、隔离和数据接口、LAN、MIL-STD-1553、PoE、SCR 和双向可控硅触发器、SHDSL、T1/E1、T3/E3 和 VDSL。