48741-01-BX中文资料力特数据手册PDF规格书

描述 Description

Monitors both battery voltage and ignition status, shutting

down non-critical loads when the cutoff voltage is reached, or

at the set time after the ignition is turned off. It is a timer and

voltage sensor in one easy-to-connect unit. If either the cutoff

voltage or time limit is reached, the FlexMod will shut down

the auxiliary loads, providing double protection.

Features and Benefits

• Preserves starting power; eliminates downtime and jump

starts due to dead batteries. Simultaneous time and voltage

monitoring protects starting.

• Monitors voltage and time simultaneously, providing double

the protection to batteries. Battery will not be drained if

battery voltage gets low before timer has run out.

• Auto-ranging to automatically sense the voltage of the

system (12 or 24V) and selects the presets appropriate to

that voltage.

• Waterproof, dustproof and vibration-proof. Sealed to IP67

so it can mount on a vehicle even in places where roadsplash

is a problem.

• Ultra low 1mA standby current means minimal battery

drain – especially valuable when vehicle is in storage or not

in use.

• Factory programmable unit is highly versatile: with a broad

range of presets available to match any special application.

• Rated for more than 1,000,000 on-off cycles – unit

operates for the lifetime of the vehicle. Solid state

technology gives long life and low maintenance.

• Compact design (4 x 3 x 1”) – Uses less space; mounts

outside or inside. Saves money by eliminating other

hardware, and provides better wire routing