General:

• This mechanical component is designed and manufactured for use in general electronic equipment.

• Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any

equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control,

ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are

especially required and/or if there is the possibility of direct damage or human injury.

• Mechanical components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.

• The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions

specified in the datasheet are not met, the component may be damaged or dissolved.

• Do not drop or impact the components, the component may flake apart.

• Prevent any damage or scratches on the switch, especially on the actuator.

• Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth

Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and

sustainability over time.

• The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the

authority of the customer. All technical specifications for standard products also apply to customer specific products.

428427320916属于开关 > DIP 开关。伍尔特集团制造生产的428427320916DIP 开关DIP 开关是用于控制电路中电流的机电器件。通常将该系列中的器件分为两种：用作跳线块的小型开关，以及需要使用工具进行设定的小型旋转式开关。执行器类型包括阻断型（分流）、琴键型、摇杆型、旋转型、滑动型、标准型和平拨型，位数范围为 1 至 64。