3510-S08-T中文资料友顺数据手册PDF规格书

DESCRIPTION

The UTC 3510is designed to provide protection circuits, power good output (PGO) indicator, fault protection output (FPO) and a PSON control for PC switching power supply systems. The protection circuits include over voltage protection (OVP) monitoring for 3.3V, 5V and 12V (12V via VDDpin) and under voltage protection(UVP) monitoring for 3.3V and 5V. When an OV or UV event

arose and is detected, the power good output (PGO) goes low and the FPO will be set to high. The protection latch can be reset by setting PSON to high. UVP function is enabled 75ms after PSON is set low and de-bounced. Besides, there isa 2.3ms delay with 38ms de-bounce at turn off but no delay during turn on. When OVP and UVP detected the rightvoltage level, a PGO signal will be issued.

FEATURES

* Over Voltage Protection and Lock Out for 3V, 5V and 12V.

* Under Voltage Protection and Lock Out for 3.3V and 5V.

* Open Drain Output for PGO and FPO pin.

* 300ms delay for PGO.

* 75ms delay for 3.3V and 5V short-circuit turn-on protection.

* 2.3ms PSON control to FPO turn-off delay.

* 38ms PSON control de-bounce.

* 73us width noise deglitches.

* Wide supply voltage range from 4V ~15V.