29LV017B-70中文资料​​​​​​​​​​​​旺宏电子数据手册PDF规格书

GENERAL DESCRIPTION

The MX29LV017B is a 16-mega bit Flash memory organized as 2M bytes of 8 bits. MXICs Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory. The MX29LV017B is packaged in 40-pin TSOP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES

• Extended single - supply voltage range 2.7V to 3.6V

• 2,097,152 x 8

• Single power supply operation

- 3.0V only operation for read, erase and program operation

• Fast access time: 70/90ns

• Fully compatible with MX29LV017A decice

• Low power consumption

- 30mA maximum active current

- 0.2uA typical standby current

• Command register architecture

- Byte Programming (9us typical)

- Sector Erase (Sector structure 64K-Byte x32)

• Auto Erase (chip & sector) and Auto Program

- Automatically erase any combination of sectors with Erase Suspend capability.

- Automatically program and verify data at specified address

• Erase suspend/Erase Resume

- Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase.

• Status Reply

- Data# Polling & Toggle bit for detection of program and erase operation completion.

• Ready/Busy# pin (RY/BY#)

- Provides a hardware method of detecting program or erase operation completion.

• Sector protection

- Hardware method to disable any combination of sectors from program or erase operations

- Temporary sector unprotect allows code changes in previously locked sectors.

• CFI (Common Flash Interface) compliant

- Flash device parameters stored on the device and provide the host system to access

• 100,000 minimum erase/program cycles

• Latch-up protected to 100mA from -1V to VCC+1V

• Low VCC write inhibit is equal to or less than 1.4V

• Package type:

- 40-pin TSOP

• Compatibility with JEDEC standard

- Pinout and software compatible with single-power supply Flash