29F1610A-12中文资料​​​​​​​​​​​​旺宏电子数据手册PDF规格书

GENERAL DESCRIPTION

The MX29F1610A is a 16-mega bit Flash memory organized as either 1M wordx16 or 2M bytex8. The MX29F1610A includes 16-128KB(131,072) blocks or 16-64KW(65,536) blocks. MXICs Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29F1610A is packaged in 48-pin TSOP or 44-pin SOP. For 48-pin TSOP, CE2 and RY/BY are extra pins compared with 44-pin SOP package. This is to optimize the products (such as solid-state disk drives or flash memory cards) control pin budget. All the above three pins(CE2,RY/BY and PWD) plus one extra VCC pin are not provided in 44-pin SOP. It is designed to be reprogrammed and erased in-system or in-standard EPROM programmers.

FEATURES

• 5V ± 10 write and erase

• JEDEC-standard EEPROM commands

• Endurance:100,000 cycles

• Fast access time: 90/100/120ns

• Sector erase architecture

- 16 equal sectors of 128k bytes each

- Sector erase time: 1.3 s typical

• Auto Erase and Auto Program Algorithms

- Automatically erases any one of the sectors or the whole chip with Erase Suspend capability

- Automatically programs and verifies data at specified addresses

• Status Register feature for detection of program or erase cycle completion

• Low VCC write inhibit is equal to or less than 3.2V

• Software and hardware data protection

• Page program operation

- Internal address and data latches for 128 bytes/64 words per page

- Page programming time: 0.9ms typical

- Byte programming time: 7us in average

• Low power dissipation

- 30mA typical active current

- 1uA typical standby current

• CMOS and TTL compatible inputs and outputs

• Sector Protection

- Hardware method that can protect any combination of sectors from write or erase operations.

• Deep Power-Down Input

- 1uA ICC typical

• Industry standard surface mount packaging

- 48 lead TSOP, TYPE I

- 44 lead SOP