24LC08集成电路（IC）的存储器规格书PDF中文资料

OVERVIEW

The 24LC08 serial EEPROM has a 8,192-bit (1,024-byte) capacity, supporting the standard I2C™-bus serial interface. It is fabricated using CERAMATEs most advanced CMOS technology. One of its major feature ’ is a hardware-based write protection circuit for the entire memory area. Hardware-based write protection is controlled by the state of the write-protect (WP) pin. Using one-page write mode, you can load up to 16 bytes of data into the EEPROM in a single write operation. Another significant feature of the 24LC08 is its support for fast mode and standard mode.

FEATURES

I2C-Bus Interface

• Two-wire serial interface

• Automatic word address increment

EEPROM

• 8K-bit (1,024-byte) storage area

• 16-byte page buffer

• Typical 3.5 ms write cycle time with auto-erase function

• Hardware-based write protection for the entire EEPROM (using the WP pin)

• EEPROM programming voltage generated on chip

• 1,000,000 erase/write cycles

• 100 years data retention

Operating Characteristics

• Operating voltage

— 2.5 V to 5.5 V (write)

— 2.2 V to 5.5 V (read)

• Operating current

— Maximum write current: < 3 mA at 5.5 V

— Maximum read current: < 200 mA at 5.5 V

— Maximum stand-by current: < 5 mA at 3.3 V

• Operating temperature range

— – 25°C to + 70°C (commercial)

— – 40°C to + 85°C (industrial)

• Operating clock frequencies

— 100 kHz at standard mode

— 400 kHz at fast mode

• Electrostatic discharge (ESD)

— 3,000 V (HBM)

— 300 V (MM)

Packages

• 8-pin DIP, SOP, and TSSOP