SHIELDED SMT POWER INDUCTORS

● FEATURE Various high power inductor are Superior to be high saturation for surface mounting ● APPLICATIONS 2 DC/DC converter power supply, Telecommunication equipment

文件：178.23 Kbytes 页数：4 Pages

PRODUCTWELL

WIRE WOUND SMD INDUCTOR

●FEATURE 1. Low core loss for high frequency power application 2. Large terminal surface ●APPLICATION 1. Portable communication equipment, notebook computer

文件：718.61 Kbytes 页数：4 Pages

AITSEMI

创瑞科技

丝印：1R3；Package：VQFN-HR；LMR436x0, 36-V, 1-A/2-A Buck Converter with 2.5 μA IQ at 150°C TJMAX in 4-mm2 HotRod™ QFN

1 Features • Functional Safety-Capable – Documentation available to aid functional safety system design • Miniature solution size and low component cost – 2-mm × 2-mm HotRod™ package with wettable flanks – Internal compensation • Optimized for ultra-low EMI requirements – Pin selectable F

文件：3.67192 Mbytes 页数：51 Pages

TI

德州仪器

丝印：1R3；Package：DFN4；Ultra low quiescent current, Fast Load Transient 300 mA CMOS Low Dropout Regulator in ultra small package

1. Description The TCR3UM series are CMOS general-purpose single-output voltage regulators with an on/off control input, featuring ultra low quiescent bias current and low dropout voltage. These voltage regulators are available in fixed output voltages between 0.8 V and 5.0 V and capable of d

文件：846.25 Kbytes 页数：17 Pages

TOSHIBA

东芝

Mini-Change A-Size Receptacle with Leads, 1/2 - 14NPT Threads, Straight Male, 3 Poles, Length

文件：175.49 Kbytes 页数：2 Pages

MOLEX

莫仕

丝印：1R3B；Package：SOT-23；ESDS30x Data-Line Surge and ESD Protection Devices for High Speed Interfaces

1 Features • IEC 61000-4-2 level 4 ESD protection: – ±30kV contact discharge – ±30kV air gap discharge • IEC 61000-4-4 EFT protection: – 80 A (5/50ns) • IEC 61000-4-5 surge protection: – 12A (8/20μs) – Low surge clamping voltage 6V at 12A Ipp • IO capacitance: – 2.3pF (typical) • DC bre

文件：975.24 Kbytes 页数：19 Pages

TI

德州仪器

丝印：1R3B；Package：SOT-23；ESDS30x Data-Line Surge and ESD Protection Devices for High Speed Interfaces

1 Features • IEC 61000-4-2 level 4 ESD protection: – ±30kV contact discharge – ±30kV air gap discharge • IEC 61000-4-4 EFT protection: – 80 A (5/50ns) • IEC 61000-4-5 surge protection: – 12A (8/20μs) – Low surge clamping voltage 6V at 12A Ipp • IO capacitance: – 2.3pF (typical) • DC bre

文件：975.24 Kbytes 页数：19 Pages

TI

德州仪器

丝印：1R3B；Package：SOT23-6；4-Line ESD Protection Diode Array

Features * Ultra low leakage: nA level * Ultra low operating voltage: 3.6V * Ultra low clamping voltage * Complies with following standards: - IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ± 30kV - IEC61000-4-4 (EFT) 80A (5/50ns) - IEC61000-4-5 (Lightning) 10A

文件：2.2056 Mbytes 页数：4 Pages

TECHPUBLIC

台舟电子

丝印：1R3Q；Package：VQFN-HR；LMR436x0-Q1, 36V, 1A / 2A, Automotive Buck Converter With 2.5μA IQ at 150°C TJMAX in 4mm2 HotRod™ QFN

1 Features • AEC-Q100-qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Greater than 85 efficiency at 1mA – 1.2μA total non-switching IQ at 13.5VIN, fixed 3.3VOUT

文件：4.79809 Mbytes 页数：59 Pages

TI

德州仪器

丝印：1R3Q；Package：VQFN-HR；LMR436x0-Q1, 36V, 1A / 2A, Automotive Buck Converter With 2.5μA IQ at 150°C TJMAX in 4mm2 HotRod™ QFN

1 Features • AEC-Q100-qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Functional Safety-Capable – Documentation available to aid functional safety system design • Greater than 85% efficiency at 1mA – 1.2μA total non-switching IQ at 13.5VIN, fixed 3.3

文件：4.68485 Mbytes 页数：55 Pages

TI

德州仪器