1N829A

Zener Diode Single 2-Pin 6.2V, 5%, 10Ohm, 500mW DO-35 Bag; JEDEC registered 1N821 thru 1N829 series\nInternal metallurgical bond option available by adding a “-1” suffix\nReference voltage selection of 6.2 V & 6.55 V +/-5% with further tight tolerance options at lower voltage\n1N821, 823, 825, 827 and 829 also have qualification to MIL-PRF-19500/159 by adding the JAN, JANTX, or JANTXV prefixes to part numbers a well as the “-1” suffix; e.g\nJANTX1N829-1, etc\nMilitary surface mount equivalents also available in DO-213AA by adding UR-1 suffix and the JAN, JANTX, and JANTXV prefix, e.g\nJANTX1N829UR-1 (see separate data sheet)\nAlso available in DO-7 package including military qualifications up to JANS (see separate data sheet)\nJANS equivalent available in DO-35 via SCD\nProvides minimal voltage changes over a broad temperature range\nFor instrumentation and other circuit designs requiring a stable voltage reference\nMaximum temperature coefficient selections available from 0.01%/ºC to 0.0005%/ºC\nTight reference voltage tolerances available with center nominal value of 6.15 V by adding designated tolerance such as 1%, 2%, 3%, etc\nafter the part number for identification e.g\n1N827-2%, 1N829A-1-1%, 1N829-1-1%, etc\nFlexible axial-lead mounting terminals\nNon sensitive to ESD per MIL-STD-750 Method 1020\nTypical low capacitance of 100 pF or less.;

The popular 1N821 thru 1N829A series of Zero-TC Reference Diodes provides a selection of both 6.2 V and 6.55 V nominal voltages and temperature coefficients to as low as 0.0005%/o C for minimal voltage change with temperature when operated at 7.5 mA. These glass axialleaded DO-35 reference diodes are optionally available with an internalmetallurgical-bond by adding a “-1” suffix. This type of bonded Zener package construction is also available in JAN, JANTX, and JANTXV military qualifications. Microchip also offers numerous other Zener Reference Diode products for a variety of other voltages up to 200 V.

1N829A

6.2 & 6.55 Volt Temperature Compensated 6.2 & 6.55 Volt Temperature Compensated

1N829A

TEMPERATURE COMPENSATED ZENER REFERENCE DIODES

1N829A

Package：DO-204AH，DO-35，轴向；包装：散装 类别：分立半导体产品 二极管 - 齐纳 - 单 描述：DIODE ZENER 6.2V 500MW DO35

1N829A-1E3

Zener Diode Single 2-Pin 6.2V, 5%, 10Ohm, 500mW DO-35 Bag; JEDEC registered 1N821 thru 1N829 series\nInternal metallurgical bond option available by adding a “-1” suffix\nReference voltage selection of 6.2 V & 6.55 V +/-5% with further tight tolerance options at lower voltage\n1N821, 823, 825, 827 and 829 also have qualification to MIL-PRF-19500/159 by adding the JAN, JANTX, or JANTXV prefixes to part numbers a well as the “-1” suffix; e.g\nJANTX1N829-1, etc\nMilitary surface mount equivalents also available in DO-213AA by adding UR-1 suffix and the JAN, JANTX, and JANTXV prefix, e.g\nJANTX1N829UR-1 (see separate data sheet)\nAlso available in DO-7 package including military qualifications up to JANS (see separate data sheet)\nJANS equivalent available in DO-35 via SCD\nProvides minimal voltage changes over a broad temperature range\nFor instrumentation and other circuit designs requiring a stable voltage reference\nMaximum temperature coefficient selections available from 0.01%/ºC to 0.0005%/ºC\nTight reference voltage tolerances available with center nominal value of 6.15 V by adding designated tolerance such as 1%, 2%, 3%, etc\nafter the part number for identification e.g\n1N827-2%, 1N829A-1-1%, 1N829-1-1%, etc\nFlexible axial-lead mounting terminals\nNon sensitive to ESD per MIL-STD-750 Method 1020\nTypical low capacitance of 100 pF or less.;

The popular 1N821 thru 1N829A series of Zero-TC Reference Diodes provides a selection of both 6.2 V and 6.55 V nominal voltages and temperature coefficients to as low as 0.0005%/o C for minimal voltage change with temperature when operated at 7.5 mA. These glass axialleaded DO-35 reference diodes are optionally available with an internalmetallurgical-bond by adding a “-1” suffix. This type of bonded Zener package construction is also available in JAN, JANTX, and JANTXV military qualifications. Microchip also offers numerous other Zener Reference Diode products for a variety of other voltages up to 200 V.

1N829AE3

Zener Diode Single 2-Pin 6.2V, 5%, 10Ohm, 500mW DO-35 Bag; JEDEC registered 1N821 thru 1N829 series\nInternal metallurgical bond option available by adding a “-1” suffix\nReference voltage selection of 6.2 V & 6.55 V +/-5% with further tight tolerance options at lower voltage\n1N821, 823, 825, 827 and 829 also have qualification to MIL-PRF-19500/159 by adding the JAN, JANTX, or JANTXV prefixes to part numbers a well as the “-1” suffix; e.g\nJANTX1N829-1, etc\nMilitary surface mount equivalents also available in DO-213AA by adding UR-1 suffix and the JAN, JANTX, and JANTXV prefix, e.g\nJANTX1N829UR-1 (see separate data sheet)\nAlso available in DO-7 package including military qualifications up to JANS (see separate data sheet)\nJANS equivalent available in DO-35 via SCD\nProvides minimal voltage changes over a broad temperature range\nFor instrumentation and other circuit designs requiring a stable voltage reference\nMaximum temperature coefficient selections available from 0.01%/ºC to 0.0005%/ºC\nTight reference voltage tolerances available with center nominal value of 6.15 V by adding designated tolerance such as 1%, 2%, 3%, etc\nafter the part number for identification e.g\n1N827-2%, 1N829A-1-1%, 1N829-1-1%, etc\nFlexible axial-lead mounting terminals\nNon sensitive to ESD per MIL-STD-750 Method 1020\nTypical low capacitance of 100 pF or less.;

The popular 1N821 thru 1N829A series of Zero-TC Reference Diodes provides a selection of both 6.2 V and 6.55 V nominal voltages and temperature coefficients to as low as 0.0005%/o C for minimal voltage change with temperature when operated at 7.5 mA. These glass axialleaded DO-35 reference diodes are optionally available with an internalmetallurgical-bond by adding a “-1” suffix. This type of bonded Zener package construction is also available in JAN, JANTX, and JANTXV military qualifications. Microchip also offers numerous other Zener Reference Diode products for a variety of other voltages up to 200 V.

1N829AUR

6.2 & 6.55 Volt Temperature Compensated Surface Mount Zener Reference Diodes

DESCRIPTION Thepopular1N821thru1N829seriesofZero-TCReferenceDiodesprovidesaselectionofboth6.2Vand6.55Vnominalvoltagesandtemperaturecoefficientstoaslowas0.0005/oCforminimalvoltagechangewithtemperaturewhenoperatedat7.5mA.Theseglassaxial-leadedDO-7referen

1N829AUR-1

6.2 & 6.55 Volt Temperature Compensated Surface Mount Zener Reference Diodes

DESCRIPTION Thepopular1N821thru1N829seriesofZero-TCReferenceDiodesprovidesaselectionofboth6.2Vand6.55Vnominalvoltagesandtemperaturecoefficientstoaslowas0.0005/oCforminimalvoltagechangewithtemperaturewhenoperatedat7.5mA.Theseglassaxial-leadedDO-7referen

1N829AUR-1TR

6.2 & 6.55 Volt Temperature Compensated Surface Mount Zener Reference Diodes

DESCRIPTION Thepopular1N821thru1N829seriesofZero-TCReferenceDiodesprovidesaselectionofboth6.2Vand6.55Vnominalvoltagesandtemperaturecoefficientstoaslowas0.0005/oCforminimalvoltagechangewithtemperaturewhenoperatedat7.5mA.Theseglassaxial-leadedDO-7referen

1N829AURTR

6.2 & 6.55 Volt Temperature Compensated Surface Mount Zener Reference Diodes

DESCRIPTION Thepopular1N821thru1N829seriesofZero-TCReferenceDiodesprovidesaselectionofboth6.2Vand6.55Vnominalvoltagesandtemperaturecoefficientstoaslowas0.0005/oCforminimalvoltagechangewithtemperaturewhenoperatedat7.5mA.Theseglassaxial-leadedDO-7referen