1N5736

SILICON 400MW ZENER DIODES

FEATURES •ZENERVOLTAGE4.7TO75V •SMALLRUGGEDDOUBLESLUGCONSTRUCTIONDO-35 •CONSTRUCTEDWITHANOXIDEPASSIVATEDALLDIFFUSEDDIE

1N5736A

ELECTRICAL CHARACTERISTICS

ELECTRICALCHARACTERISTICS *JEDECRegisteredData.TheTypeNumberindicates5Tolerance(SeeNote1.)

1N5736B

SILICON 400 mW ZENER DIODES

FEATURES •ZENERVOLTAGE4.7TO75V •SMALLRUGGEDDOUBLESLUGCONSTRUCTIONDO-35 •CONSTRUCTEDWITHANOXIDEPASSIVATEDALLDIFFUSEDDIE

1N5736B

SILICON 400MW ZENER DIODES

FEATURES •ZENERVOLTAGE4.7TO75V •SMALLRUGGEDDOUBLESLUGCONSTRUCTIONDO-35 •CONSTRUCTEDWITHANOXIDEPASSIVATEDALLDIFFUSEDDIE

1N5736B

Axial-Leaded 500 mW Zener Diodes

DESCRIPTION The1N5728thru1N5757seriesof0.5wattZenerVoltageRegulatorsprovidesaselectionfrom4.7to75voltsinstandard5tolerancesaswellastightertolerancesidentifiedbya“C”or“D”suffixletteronthepartnumber.Theseglassaxial-leadedDO-35Zenersarealsoavailablewit

1N5736B

Zener Diodes;

The 1N5728 thru 1N5757 series of 0.5 watt Zener Voltage Regulators provides a selection from 4.7 to 75 volts in standard 5% tolerances as well as tighter tolerances identified by a “C” or “D” suffix letter on the part number. These glass axial-leaded DO-35 Zeners are also available with an internal-metallurgical-bond option by adding a “-1” suffix. Microsemi also offers numerous other Zener products to meet higher and lower power applications.

1N5736B-1

Axial-Leaded 500 mW Zener Diodes

DESCRIPTION The1N5728thru1N5757seriesof0.5wattZenerVoltageRegulatorsprovidesaselectionfrom4.7to75voltsinstandard5tolerancesaswellastightertolerancesidentifiedbya“C”or“D”suffixletteronthepartnumber.Theseglassaxial-leadedDO-35Zenersarealsoavailablewit

1N5736C

Zener Diode Single 2-Pin 10V, 2%, 20Ohm, 500mW DO-35 Bag; JEDEC registered 1N5728 to 1N5757 series.\n Internal metallurgical bond option available by adding a “-1” suffix.\n Options for screening in accordance with MILPRF-19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, , , or MSP prefixes respectively to part numbers with “-1” suffix. \nSurface Mount equivalents are also available in DO-213AA by adding a UR or UR-1 suffix, e.g. 1N5728UR, 1N5746UR-1, etc. (see separate data sheets). \nRegulates voltage over a broad operating current and temperature range.\n Extensive selection from 4.7 to 75 V. \nStandard voltage tolerances of plus/minus 5% with a B suffix. \nTight tolerances are available in plus or minus 2% or 1% with C or D suffix respectively.\n Flexible axial-lead mounting terminals.\n Non sensitive to ESD per MIL-STD-750 Method 1020. \nMinimal capacitance (see Figure 3).\n Inherently radiation hard as described in Microchip MicroNote 050.;

The 1N5728 thru 1N5757 series of 0.5 watt Zener Voltage Regulators provides a selection from 4.7 to 75 volts in standard 5% tolerances as well as tighter tolerances identified by a “C” or “D” suffix letter on the part number. These glass axial-leaded DO-35 Zeners are also available with an internal-metallurgical-bond option by adding a “-1” suffix. Microchip also offers numerous other Zener products to meet higher and lower power applications.

1N5736B

ZENER VOLTAGE 4.7 TO 75V

1N5736D

稳压二极管 Voltage Regulator;