1N5523C

0.4W LOW VOLTAGE AVALANCHE DIODES

FEATURES *Lowzenernoisespecified *Lowzenerimpedance *Lowleakagecurrent *Hermeticallysealedglasspackage

1N5523C

LEADLESS PACKAGE FOR SURFACE MOUNT ZENER DIODE, 500mW

•1N5518BUR-1THRU1N5546BUR-1AVAILABLEINJAN,JANTXANDJANTXVPERMIL-PRF-19500/437 •ZENERDIODE,500mW •LEADLESSPACKAGEFORSURFACEMOUNT •LOWREVERSELEAKAGECHARACTERISTICS •METALLURGICALLYBONDED

1N5523C

Zener Diode Single 2-Pin 5.1V, 2%, 500mW DO-35 Bag; JEDEC registered 1N5518 thru 1N5546. \nVoltage tolerances of plus/minus 20%, 10%, 5%, 2%, and 1% available. See Note 1 on page 3.\n Internal metallurgical bond option available with “-1” suffix. JAN, JANTX, and JANTXV qualification per MIL-PRF-19500/437 available (requires metallurgical bond option as well as plus/minus 5% voltage tolerance or tighter with B-1, C-1 or D-1 suffix). \nRoHS compliant versions available (commercial grade only). \nRegulates voltage over a broad operating current and temperature range. \nGuaranteed voltage regulation (∆VZ) from IZL to IZT. \nVoltage selection from 3.3 to 33 V. \nFlexible axial-lead mounting terminals. \nNonsensitive to ESD per MIL-STD-750 Method 1020. \nMinimal capacitance (see Figure 3).\n Inherently radiation hard as described in Microchip “MicroNote 050” which is available at Microchip.com.;

The 1N5518 thru 1N5546 series of 0.5 watt axial-leaded glass Zener Voltage Regulators provides a selection from 3.3 to 33 volts with tolerances ranging from plus/minus 1% to 20%. The standard tolerance is plus/minus 5% with the B suffix unless ordered otherwise. These axial-leaded glass DO-35 Zeners are also available with an internal metallurgical bond option. This type of bonded Zener package construction is also available in JAN, JANTX, and JANTXV military qualifications. Microchip also offers numerous other Zener products to meet higher and lower power applications.

1N5523C

Package：DO-204AH，DO-35，轴向；包装：散装 类别：分立半导体产品 二极管 - 齐纳 - 单 描述：VOLTAGE REGULATOR

1N5523C-1

LEADLESS PACKAGE FOR SURFACE MOUNT ZENER DIODE, 500mW

•1N5518BUR-1THRU1N5546BUR-1AVAILABLEINJAN,JANTXANDJANTXVPERMIL-PRF-19500/437 •ZENERDIODE,500mW •LEADLESSPACKAGEFORSURFACEMOUNT •LOWREVERSELEAKAGECHARACTERISTICS •METALLURGICALLYBONDED

1N5523CUR

Low Voltage Surface Mount 500 mW Avalanche Diodes

•1N5518BUR-1THRU1N5546BUR-1AVAILABLEINJAN,JANTXANDJANTXVPERMIL-PRF-19500/437 •ZENERDIODE,500mW •LEADLESSPACKAGEFORSURFACEMOUNT •LOWREVERSELEAKAGECHARACTERISTICS •METALLURGICALLYBONDED

1N5523CUR

LEADLESS PACKAGE FOR SURFACE MOUNT ZENER DIODE, 500mW

•1N5518BUR-1THRU1N5546BUR-1AVAILABLEINJAN,JANTXANDJANTXVPERMIL-PRF-19500/437 •ZENERDIODE,500mW •LEADLESSPACKAGEFORSURFACEMOUNT •LOWREVERSELEAKAGECHARACTERISTICS •METALLURGICALLYBONDED

1N5523CUR

0.5W 5.1V 2% Zener Diode;

This Zener Diode is packaged in SOD-80, which has a power dissipation of 0.5W.\n\n Available as High Reliability device as per MIL-PRF-19500/435 indicate –HR suffix after the part number. Contact for -HR flow. Add \"PBF\" suffix for Pb-free lead finish.\n\n

1N5523CUR-1

LEADLESS PACKAGE FOR SURFACE MOUNT ZENER DIODE, 500mW

•1N5518BUR-1THRU1N5546BUR-1AVAILABLEINJAN,JANTXANDJANTXVPERMIL-PRF-19500/437 •ZENERDIODE,500mW •LEADLESSPACKAGEFORSURFACEMOUNT •LOWREVERSELEAKAGECHARACTERISTICS •METALLURGICALLYBONDED

1N5523C-HR

0.5W 5.1V 2% Zener Diode;

ETC