DESCRIPTION

The 1N5333-5388B JEDEC registered series of axial-leaded 5.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by specific suffix letter on the part number. These plastic encapsulated Zeners have moisture classification of Level 1 with no dry pack required and are also available in various military equivalent screening levels by adding a prefix identifier as also described in the Features section. They may be operated at high maximum dc currents with adequate heat sinking with their comparatively low thermal resistance design. Microsemi also offers numerous other Zener products to meet higher and lower power applications.

FEATURES

• JEDEC registered 1N5333 to 1N5388B

• Zener voltage available 3.3V to 200V

• Standard voltage tolerances are plus/minus 5 with B suffix and 10 with A suffix identification

• Tight tolerances available in plus or minus 2 or 1 with C or D suffix respectively

• Options for screening in accordance with MIL-PRF- 19500 for JAN, JANTX, and JANTXV are available by adding MQ, MX, or MV prefixes respectively to part numbers.

• Surface mount equivalents available as SMBJ5333 to SMBJ5388B, or SMBG5333B to SMBG5388B

• RoHS Compliant devices available by adding e3 suffix

APPLICATIONS / BENEFITS

• Regulates voltage over a broad operating current and temperature range

• Wide selection from 3.3 to 200 V

• Flexible axial-lead mounting terminals

• Nonsensitive to ESD per MIL-STD-750 Method 1020

• Withstands high surge stresses

• Minimal changes of voltage versus current as specified by voltage regulation (ΔVZ)

• High specified maximum current (IZM) when adequately heat sunk

• Moisture classification is Level 1 per IPC/JEDEC JSTD-020B with no dry pack required

1N5373B属于分立半导体产品 > 二极管 - 齐纳 - 单。美高森美公司制造生产的1N5373B二极管 - 齐纳 - 单齐纳二极管可用于以反向击穿模式工作，并根据以这种方式使用时的行为来分类。这些器件可用作电压基准或限压用途，还可以用作类似于整流二极管的单向电流阀，但它们在这种模式下的性能通常不如专用器件理想。该系列产品的每个器件封装恰好实现该功能的一个实例。