GLASS SURFACE MOUNT 0.5 WATT ZENERS

DESCRIPTION The 1N4099UR thru 1N4135UR and 1N4614UR thru 1N4627UR series of 0.5 watt glass surface mount DO-213AA Zener voltage regulators provides a selection from 1.8 to 100 volts in standard 5 tolerances as well as tighter tolerances identified by different suffix letters on the part number.

文件：189.46 Kbytes 页数：3 Pages

MICROSEMI

美高森美

SILICON 400mA LOW NOISE ZENER DIODES

• 1N4099UR-1 THRU 1N4135UR-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/435 • LEADLESS PACKAGE FOR SURFACE MOUNT • LOW CURRENT OPERATION AT 250 µA • METALLURGICALLY BONDED MAXIMUM RATINGS Junction and Storage Temperature: -65°C to +175°C DC Power Dissipation: 50

文件：109.42 Kbytes 页数：2 Pages

MICROSEMI

美高森美

GLASS SURFACE MOUNT 0.5 WATT ZENERS

DESCRIPTION The 1N4099UR thru 1N4135UR and 1N4614UR thru 1N4627UR series of 0.5 watt glass surface mount DO-213AA Zener voltage regulators provides a selection from 1.8 to 100 volts in standard 5 tolerances as well as tighter tolerances identified by different suffix letters on the part number.

文件：189.46 Kbytes 页数：3 Pages

MICROSEMI

美高森美

GLASS SURFACE MOUNT 0.5 WATT ZENERS

DESCRIPTION The 1N4099UR thru 1N4135UR and 1N4614UR thru 1N4627UR series of 0.5 watt glass surface mount DO-213AA Zener voltage regulators provides a selection from 1.8 to 100 volts in standard 5 tolerances as well as tighter tolerances identified by different suffix letters on the part number.

文件：189.46 Kbytes 页数：3 Pages

MICROSEMI

美高森美

GLASS SURFACE MOUNT 0.5 WATT ZENERS

DESCRIPTION The 1N4099UR thru 1N4135UR and 1N4614UR thru 1N4627UR series of 0.5 watt glass surface mount DO-213AA Zener voltage regulators provides a selection from 1.8 to 100 volts in standard 5 tolerances as well as tighter tolerances identified by different suffix letters on the part number.

文件：189.46 Kbytes 页数：3 Pages

MICROSEMI

美高森美

0.5W 39V 1% Zener Diode

This Zener Diode is packaged in SOD-80, which has a power dissipation of 0.5W.\n\n Available as High Reliability device as per MIL-PRF-19500/435 indicate –HR suffix after the part number. Contact for -HR flow. Add \"PBF\" suffix for Pb-free lead finish.

Digitron