WAN Clock for T1 and E1 Systems

GENERAL DESCRIPTION The XRT8001 WAN Clock is a dual-phase-locked loop chip that generates two very low jitter output clock signals that can be used for synchronization clocks in wide area networking systems. The XRT8001 has preprogrammed multipliers and dividers that are selected via the serial p

文件：1.05492 Mbytes 页数：48 Pages

EXAR

艾科嘉

WAN Clock

The XRT8001 is a single-chip, dual phase-locked loop clock adapter for WAN and ISDN applications. This product accommodates the most popular frequencies encountered in T1/E1 access equipment, T1/E1 multiplexers and concentrators, sub-rate switches, routers, Frame Relay Access Devices (FRADs), Remote ·Clock adaptation for most popular telecommunication frequencies\n ·Wide input frequency range\n ·Programmable output frequencies\n ·Less than 0.05UI wide band output jitter\n ·Low power operation (5V and 3.3V)\n ·Maximum lock time of 45ms\n ·Pb-Free, RoHS Compliant Versions Offered\n;

MaxLinear

迈凌

WAN Clock for T1 and E1 Systems

GENERAL DESCRIPTION The XRT8001 WAN Clock is a dual-phase-locked loop chip that generates two very low jitter output clock signals that can be used for synchronization clocks in wide area networking systems. The XRT8001 has preprogrammed multipliers and dividers that are selected via the serial p

文件：1.05492 Mbytes 页数：48 Pages

EXAR

艾科嘉

WAN Clock for T1 and E1 Systems

GENERAL DESCRIPTION The XRT8001 WAN Clock is a dual-phase-locked loop chip that generates two very low jitter output clock signals that can be used for synchronization clocks in wide area networking systems. The XRT8001 has preprogrammed multipliers and dividers that are selected via the serial p

文件：1.05492 Mbytes 页数：48 Pages

EXAR

艾科嘉

Package：18-DIP（0.300"，7.62mm）；包装：托盘 类别：集成电路（IC） 应用特定时钟/定时 描述：IC WAN CLOCK E1/E1 DUAL 18DIP

MaxLinear, Inc.