XRT75L00D集成电路（IC）的电信规格书PDF中文资料

GENERAL DESCRIPTION

The XRT75L00D is a single-channel fully integrated Line Interface Unit (LIU) with Sonet Desynchronizer for E3/DS3/STS-1 applications. It incorporates an independent Receiver, Transmitter and Jitter Attenuator in a single 52 pin TQFP package.

FEATURES

RECEIVER:

• On chip Clock and Data Recovery circuit for high input jitter tolerance.

• Meets E3/DS3/STS-1 Jitter Tolerance Requirements.

• Detects and Clears LOS as per G.775.

• Meets Bellcore GR-499 CORE Jitter Transfer Requirements.

• Receiver Monitor mode handles up to 20 dB flat loss with 6 dB cable attenuation.

• Compliant with jitter transfer template outlined in ITU G.751, G.752, G.755 and GR-499-CORE,1995 standards.

• Meets ETSI TBR 24 Jitter Transfer Requirements.

• On chip B3ZS/HDB3 encoder and decoder that can be either enabled or disabled.

• On-chip clock synthesizer provides the appropriate rate clock from a single 12.288 MHz Clock.

• Provides low jitter output clock.

TRANSMITTER:

• Compliant with Bellcore GR-499, GR-253 and ANSI T1.102 Specification for transmit pulse

• Tri-state Transmit output capability for redundancy applications

• Transmitter can be turned on or off.

JITTER ATTENUATOR:

• On chip advanced crystal-less Jitter Attenuator.

• Jitter Attenuator can be selected in Receive or Transmit paths.

• 16, 32 or 128 bits selectable FIFO size.

• Meets the Jitter and Wander specifications described in T1.105.03b,ETSI TBR-24, Bellcore GR-253 and GR-499 standards.

• Jitter Attenuator can be disabled.

• De-Synchronizer for SONET STS-1 to DS-3 demapping.

CONTROL AND DIAGNOSTICS:

• 5 wire Serial Microprocessor Interface for control and configuration.

• Supports optional internal Transmit Driver Monitoring.

• PRBS error counter register to accumulate errors.

• Hardware Mode for control and configuration.

• Supports Local, Remote and Digital Loop-backs.

• Single 3.3 V ± 5 power supply.

• 5 V Tolerant I/O.

• Available in 52 pin TQFP.

• -40°C to 85°C Industrial Temperature Range.

APPLICATIONS

• E3/DS3 Access Equipment.

• DSLAMs.

• Digital Cross Connect Systems.

• CSU/DSU Equipment.

• Routers.