X5325PIZ-2.7A中文资料INTERSIL数据手册PDF规格书

DESCRIPTION

These devices combine four popular functions, Power-on Reset Control, Watchdog Timer, Supply Voltage Supervision, and Block Lock Protect Serial EEPROM Memory in one package. This combination lowers system cost, reduces board space requirements, and increases reliability.

FEATURES

• Selectable watchdog timer

• Low VCC detection and reset assertion

—Five standard reset threshold voltages

—Re-program low VCC reset threshold voltage using special programming sequence

—Reset signal valid to VCC = 1V

• Determine watchdog or low voltage reset with a volatile flag bit

• Long battery life with low power consumption

—<50µA max standby current, watchdog on

—<1µA max standby current, watchdog off

—<400µA max active current during read

• 32Kbits of EEPROM

• Built-in inadvertent write protection

—Power-up/power-down protection circuitry

—Protect 0, 1/4, 1/2 or all of EEPROM array with Block Lock™ protection

—In circuit programmable ROM mode

• 2MHz SPI interface modes (0,0 & 1,1)

• Minimize EEPROM programming time

—32-byte page write mode

—Self-timed write cycle

—5ms write cycle time (typical)

• 2.7V to 5.5V and 4.5V to 5.5V power supply operation

• Available packages

—14 Ld TSSOP, 8 Ld SOIC, 8 Ld PDIP

• Pb-free plus anneal available (RoHS compliant)