W6100-EVB-Pico2中文资料Powered by Raspberry Pi数据手册WIZnet规格书

特性 Features

●RP2350 Microcontroller with Integrated 16Mbit Flash●Symmetric dual Arm Cortex-M33 cores at up to 150MHz
●520kByte multi-bank high performance SRAM
●External Quad-SPI Flash with eXecute In Place (XIP) capabilities
●Enhanced performance full-crossbar bus fabric
●Up to 48 multi-function General Purpose IO (8 can be used for ADC on RP2350-B)●1.8-5.0V IO Voltage


●Security Features●One Time Programmable (OTP) Memory: Used for boot configuration and secure key storage.
●Secure Boot: Ensures that only authenticated software can run on the device, utilizing OTP for key verification.
●Arm TrustZone Technology: Provides hardware isolation between secure and non-secure software, enhancing security for critical applications.

●Analog and Digital Peripherals●12-bit 500ksps Analogue to Digital Converter (ADC)
●2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels
●1 × Timer with 4 alarms, 1 × Real Time Counter
●3 × Programmable IO (PIO) blocks, 12 state machines total
●Flexible, user-programmable high-speed IO
●Can emulate interfaces such as SD Card and VGA

●W6100 Ethernet Controller●Supports Hardwired Internet Protocols: TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE
●Supports 8 independent SOCKETs simultaneously with 32KB memory
●Internal 16 Kbytes Memory for TX/ RX Buffers
●SPI Interface

●Connectivity●C-Type USB port for power and data (and for reprogramming the Flash)
●40 pin 21x51 'DIP' style 1mm thick PCB with 0.1\" through-hole pins also with edge castellations
●3-pin ARM Serial Wire Debug (SWD) port

●Networking●10 / 100 Ethernet PHY embedded
●Supports Auto Negotiation●Full / Half Duplex
●10 / 100 Based

●Built-in RJ45(RB1-125BAG1A)

●Power Supply●Built-in Switch-mode DC-DC converter (replacing LDO for enhanced power efficiency)