UPD168116A中文资料瑞萨数据手册PDF规格书

DESCRIPTION

The µ PD168116A is a 7-channel H-bridge driver with a micro step function supporting pulse input that consists of a CMOS control circuit and a MOS output stage. It can reduce the current consumption and the voltage loss at the output stage compared with a conventional driver using bipolar transistors, thanks to employment of a MOS process. The µ PD168116A can drive a stepping motor by inputting pulses, so that the number of signal lines necessary for controlling the motor can be decreased.

The package is a 56-pin WQFN that helps reduce the mounting area and height.

The µ PD168116A can be used to drive two stepping motors, or two DC motors and one coil.

FEATURES

• Seven H-bridge circuits employing power MOSFET

• Low-voltage driving

VDD = 2.7 to 3.6 V

VM = 2.7 to 5.5 V

• Output on-state resistance:

1.0 Ω TYP., 1.5 Ω MAX. (sum of top and bottom stage, ch1 to ch4, and ch7)

1.5 Ω TYP., 2.0 Ω MAX. (sum of top and bottom stage, ch5 and ch6)

• PWM output (ch1 to ch6) , linear output (ch7)

• Output current

DC current: 0.4 A/ch (when each channel is used independently)

Peak current: 0.7 A/ch (when each channel is used independently)

DC current: 0.5 A/ch (when used independently)

Peak current: 0.7 A/ch (when used independently)

• Input logic frequency: 100 kHz supported

• Undervoltage lockout circuit

Shuts down the internal circuit at VDD = 1.7 V TYP.

• Overheat protection circuit

Operates at 150°C or more and shuts down internal circuitry.

• 56-pin WQFN (□8 mm, 0.5 mm pitch)