TVP5150AM1PBSR集成电路（IC）的编码器解码器转换器规格书PDF中文资料

TVP5150AM1PBSR属于集成电路（IC）的编码器解码器转换器。由德州仪器制造生产的TVP5150AM1PBSR编码器，解码器，转换器该系列产品可用于将信息封装或编码为适合于传输或存储的格式，和/或在通信路径的另一端执行逆运算，通常是通过使用某些形式的调制过程。示例包括从数字数据生成模拟视频信号的器件（反之亦然）；基于传输目的对按钮的状态进行编码的器件（实现远程控制功能）；以及便于将标准 UART 连接到标准红外收发器的器件。

1.1 Features

1

• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I,

M, N, Nc), and SECAM (B, D, G, K, K1, L) Video

• Supports ITU-R BT.601 Standard Sampling

• High-Speed 9-Bit Analog-to-Digital Converter

(ADC)

• Two Composite Inputs or One S-Video Input

• Fully Differential CMOS Analog Preprocessing

Channels With Clamping and Automatic Gain

Control (AGC) for Best Signal-to-Noise (S/N)

Performance

• Ultralow Power Consumption

• 48-Terminal PBGA Package (ZQC) or

32-Terminal TQFP Package (PBS)

• Power-Down Mode: <1 mW

• Brightness, Contrast, Saturation, Hue, and

Sharpness Control Through I2C

• Complementary 4-Line (3-H Delay) Adaptive

Comb Filters for Both Cross-Luminance and

Cross-Chrominance Noise Reduction

• Patented Architecture for Locking to Weak,

Noisy, or Unstable Signals

• Single 14.31818-MHz Crystal for All Standards

• Internal Phase-Locked Loop (PLL) for

Line-Locked Clock and Sampling

• Subcarrier Genlock Output for Synchronizing

Color Subcarrier of External Encoder

• 3.3-V Digital I/O Supply Voltage Range

• Standard Programmable Video Output Formats

– ITU-R BT.656, 8-Bit 4:2:2 With Embedded

Syncs

– 8-Bit 4:2:2 With Discrete Syncs

• Macrovision™ Copy Protection Detection

• Advanced Programmable Video Output

Formats

– 2× Oversampled Raw Vertical Blanking

Interval (VBI) Data During Active Video

– Sliced VBI Data During Horizontal Blanking

or Active Video

• VBI Modes Supported

– Teletext (NABTS, WST)

– Closed-Caption Decode With FIFO and

Extended Data Services (XDS)

– Wide Screen Signaling, Video Program

System, CGMS-A, Vertical Interval Time

Code

– Gemstar 1x/2x Electronic Program Guide

Compatible Mode

– Custom Configuration Mode That Allows

User to Program Slice Engine for Unique VBI

Data Signals

• Power-On Reset

• Industrial Temperature Range

(TVP5150AM1I): –40°C to 85°C

• Qualified for Automotive Applications

(AEC-Q100 Rev G – TVP5150AM1IPBSQ1,

TVP5150AM1IPBSRQ)

1.2 Description

The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a

space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5150AM1 decoder

converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also

available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption.

The decoder consumes 115-mW power under typical operating conditions and consumes less than 1 mW

in power-down mode, considerably increasing battery life in portable applications. The decoder uses just

one crystal for all supported standards. The TVP5150AM1 decoder can be programmed using an I2C

serial interface.

The TVP5150AM1 decoder converts baseband analog video into digital YCbCr 4:2:2 component video.

Composite and S-video inputs are supported. The TVP5150AM1 decoder includes one 9-bit

analog-to-digital converter (ADC) with 2× sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from

the 14.31818-MHz crystal or oscillator input) and is line locked. The output formats can be 8-bit 4:2:2 or

8-bit ITU-R BT.656 with embedded synchronization.

The TVP5150AM1 decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or

unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream

video encoders.

Complementary four-line adaptive comb filtering is available for both the luminance and chrominance data

paths to reduce both cross-luminance and cross-chrominance artifacts; a chrominance trap filter is also

available.

Video characteristics including hue, brightness, saturation, and sharpness may be programmed using the

industry standard I2C serial interface. The TVP5150AM1 decoder generates synchronization, blanking,

lock, and clock signals in addition to digital video outputs. The TVP5150AM1 decoder includes methods

for advanced vertical blanking interval (VBI) data retrieval. The VBI data processor slices, parses, and

performs error checking on teletext, closed caption, and other data in several formats.

The TVP5150AM1 decoder detects copy-protected input signals according to the Macrovision™ standard

and detects Type 1, 2, 3, and colorstripe processes.

The main blocks of the TVP5150AM1 decoder include:

• Robust sync detector

• ADC with analog processor

• Y/C separation using four-line adaptive comb filter

• Chrominance processor

• Luminance processor

• Video clock/timing processor and power-down control

• Output formatter

• I2C interface

• VBI data processor

• Macrovision detection for composite and S-video