TS3704IPT中文资料意法半导体数据手册PDF规格书

Features

• Input voltage 什om 20 V to 120 V DC/AC

• STD17NF25 MOSFETs power stage featuring:

- VDS = 250 V

- Ros(on)max.= 0.165 Q

• Overcurrent threshold set to 16 Apeak

• Dual footprint for IGBT/MOSFET package:

一 DPAK

- PowerFlat 6x5

• Single-shunt current sensing, suitable for:

- Sensored or sensorless 6 steps algorithm

- Single-shunt vector (FOC) algorithm

• Smart shutdown overcurrent protection

• Digital Hall sensors and encoder input

• Bus voltage sensing

• 15 V VCC and 3.3 V VDD supplies

• Embedded ST-LINK/V2-1

• Easy user interface with buttons and trimmer

• RoHS compliant

Application

• Battery operated and 110 Vac supplied power and garden tools

• Industrial fans and pumps

• Home appliances

• Industrial and home automation

Description

The EVSPIN32F0251S1 board is a 3-phase complete inverter based on the STSPIN32F0251 controller, which embeds a 3-phase 250 V gate driver and a Cortex®-M0 STM32 MCU. The power stage features STD17NF25 MOSFETs, but can be populated with any IGBT or Power MOSFET in DPAK or powerFLAT 6x5 package.

The board has a single-shunt sensing topology, and both the field-oriented control FOC) and sensored or sensorless 6-step control can be implemented. This allows driving permanent magnet synchronous motors (PMSMs) and brushless DC (BLDC) motors.

The evaluation board is compatible with a wide range input voltage from 20 V to 120 V DC/AC, and includes a power supply stage with the VIPER013BLS in buck configuration to generate +15 V and +3.3 V supply voltage required by the application.

Debug and configuration of FW can be performed with standard STM32 tools through the detachable STLINK-debugger. SWD and UART TX-RX connectors are also available.