TPT71044-SOAR中文资料思瑞浦数据手册PDF规格书

特性 Features

• Meet ISO11898 Standard

• Support CAN FD and Data Rates up to 5 Mbps

• Typical Loop Delay: 110 ns

• 5-V Power Supply, 2.25-V to 5.5-V IO Interface

• Receiver Common-Mode Input Voltage: ±30 V

• Bus Fault Protection: ±42 V

• Up to 5-kV RMS Isolation Rating (WSOP)

• ±200-kV/μs typ Static CMTI, ±150-kV/μs typ Dynamic

CMTI

• Junction Temperatures from −40°C to 150°C

• SMP8 and Wide-SOP (WSOP8, WSOP16)

• BUS pin ESD Protection (between Bus pins and

GNDB)

– ±15-kV IEC 61000-4-2 Contact Discharge

• Safety-Related Certifications:

– VDE Certification according to DIN VDE V 0884-17

(IEC60747-17)

– 5000-VRMS (WSOP16, WSOP8), 3750-VRMS (SMP8)

Isolation Rating per UL 1577

– CQC Certification per GB 4943.1

– CSA, TUV, and CB Certifications

Applications

• Industrial Automation

• Motor Control

• Solar Inverters

• Battery Charging and Management

描述 Description

The TPT710xx device is an isolated CAN transceiver that

meets the ISO11898 High-speed CAN (Controller Area

Network) physical layer standard. The device is designed

to be applied in CAN FD networks up to 5 Mbps and to

enhance timing margin and higher data rates in long and

high-loading networks. As the design, the device features

cross-wire, overvoltage, and loss of ground protection from

−42 V to +42 V, overtemperature shutdown, and a −30 V

to +30 V common-mode range. The VCCA is the power

supply input for RXD and TXD I/O pins which support a

wide range from 2.25 V to 5.5 V. The 2nd power supply

VCCB of CAN BUS side which supports the range from 4.5

V to 5.5 V.

The devices integrate high-performance digital isolators

with 5000 VRMS (WSOP8, WSOP16 packages), 3750

VRMS (SMP8 package), and isolation ratings per UL 1577.

These devices are also to be certified by VDE, UL, CSA,

and CQC.

TPT710xx family is available in WSOP8, WSOP16, and

SMP8 packages, and is characterized from −40°C to

+125°C.