TPSM828303APVCBR中文资料德州仪器数据手册PDF规格书

1 Features

• Optimized EMI performance

– Facilitates CISPR 11/32 compliance

– MagPack technology shields inductor and IC

– Integrated on-chip noise-filtering capacitors

• 0.5V to 4.5V adjustable output voltage

• 1% FB voltage accuracy (–40°C to 125°C TJ)

• 55mΩ dropout resistance

• 2.25V to 5.5V input voltage range

• 2.0MHz switching frequency

• 7μA operating quiescent current

• DCS-Control topology

• Excellent transient response

• MODE pin selectable FPWM or PSM

• Supports 1.2V GPIO

• 100% duty cycle for lowest dropout

• Active output discharge

• Power-good output

• Thermal shutdown protection

• Hiccup or latch-off OCP/OVP

• Package options with no bondwires

– Standard QFN, 1.95mm height

– Shielded MagPack package, 1.95mm height

• Create a custom design using the TPSM828303

with the WEBENCH® Power Designer

2 Applications

• Industrial PC

• LPDDR5 0.5V VDDQ Supply

• ASIC, SoC, and MCU supply

• Factory automation and control

• Medical patient monitor

• Generic point of load

3 Description

The TPSM82830x are a family of 1A, 2A, and

3A, pin-to-pin compatible, easy-to-use, synchronous,

step-down, DC/DC modules with integrated inductor

and EMI reduction technologies. The devices use

DCS-Control topology for fast transient response with

small output capacitance. The output voltage can be

set down to 0.5V with high feedback voltage accuracy

of 1% over the full operating junction temperature

range. A mode pin selects between power saving

and forced-PWM mode. The power save mode is for

longer battery life and the forced PWM mode reduces

ripple with continuous conduction in the inductor at

a quasi fixed switching frequency. An internal softstart

circuit reduces inrush current and a power-good

signal indicates correct output voltage. HICCUP shortcircuit

protection combined with thermal shutdown

protect device and application. The family is available

in a 3.0mm × 3.0mm QFN package and in the

2.5mm × 2.6mm MagPack package.