TPS650362-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• Qualified for automotive applications

• AEC-Q100 qualified with following results:

– Device operates from 4V to 35V input supply

– Device temperature grade 1: -40°C to +125°C

• Functional Safety -Compliant targeted

– Developed for functional safety applications

– Documentation to aid ISO26262 and IEC61508

system design available upon product release

– Systematic capability and hardware integrity up

to ASIL-B and SIL-2 targeted

– Under/overvoltage monitors with Built-In Self-

Test

– Watchdog (trigger or Q&A), Error Signal

Monitor

– Temperature warning and thermal shutdown

• Wide-VIN step-down converter BUCK1

– VIN range from 4 V to 35 V

– VOUT range from 3 V to 5.5 V

– Output current up to 2000-mA

– 2.2-MHz switching frequency

• Two Low-VIN step-down converters BUCK2,

BUCK3:

– VIN range from 3.0 V to 5.5 V

– VOUT range from 0.6 V to 3.4 V

– Output current up to 2700-mA peak

– 2.2-MHz or 4.4-MHz switching frequency

• One low dropout (LDO) regulator:

– VIN range from 3.0 V to 5.5 V

– VOUT range from 1.8 V to 3.4 V

– Up to 300-mA output current

– Low noise and high PSRR

• 3.5-mm × 3.5-mm 24-pin VQFN with wettable

flanks

2 Applications

• Automotive Camera Modules

– Surround View Camera modules

– Rear View Camera modules

– DMS (Driver Monitoring Systems)

– Power Over Coax (POC) camera modules

– E-mirror camera modules

• Automotive Radar Modules

– Ultra-Short Range Radar

– Kick-to-Open

– Park Assist & Automated Parking

– Driver Monitor Systems

– Vehicle Occupancy Detection, Child Presence

Detection (CPD)

– Vehicle Intruder Detection

– Seatbelt Monitoring

• Safety MCU power

– OBC, DC/DC, Zonal controller

– Inverter and Motor control (Traction inverter)

– Heating & cooling (Automotive HVAC

compressor module)

3 Description

The TPS65036x-Q1 device is a highly integrated

power management IC for automotive camera and

radar modules and MCU power. This device combines

three step-down converters and one low-dropout

(LDO) regulator. The BUCK1 step-down converter has

an input voltage range up to 35 V. All converters

can operate in a forced fixed-frequency PWM mode

or an AutoPFM mode and support optional Spread-

Spectrum Modulation (SSM) for EMI reduction. The

LDO can supply 300 mA and operate with an input

voltage range from 3 V to 5.5 V. The TPS65036x-Q1

support Low Power Mode with control from pin or I2C.

The TPS65036x-Q1 is available in a 24-pin VQFN

package (3.5 mm × 3.5 mm).