TPS51375

TPS51375 4.5V to 24V, 12A Continuous Current, 26A Maximum Current, Synchronous Buck Converter

1Features •4.5Vto24Vinputvoltagerange •0.6Vto5.5Voutputvoltage •Integrated10mΩand5mΩFETs •Support12Acontinuousoutputcurrent •270uAlowquiescentcurrent •±1.0%referencevoltageaccuracy(25°C) •D-CAP3™controlmodearchitecturecontrolforfast transientresp

TPS51375

TPS51375 4.5V to 24V, 12A Continuous Current, 26A Maximum Current, Synchronous Buck Converter

1Features •4.5Vto24Vinputvoltagerange •0.6Vto5.5Voutputvoltage •Integrated10mΩand5mΩFETs •Support12Acontinuousoutputcurrent •270uAlowquiescentcurrent •±1.0%referencevoltageaccuracy(25°C) •D-CAP3™controlmodearchitecturecontrolforfast transientresp

TPS51375

4.5V 至 24V 输入、12A（连续电流）、24A（最大值）同步降压转换器; • 4.5V to 24V input voltage range\n• 0.6V to 5.5V output voltage\n• Integrated 10mΩ and 5mΩ FETs\n• Supports 12A continuous output current\n• 270uA low quiescent current\n• ± 1.0% reference voltage accuracy (25°C)\n• D-CAP3™ control mode architecture control for fast transient response optimizing 0.77V output\n• Support POSCAP and all MLCC output capacitor\n• Differential remote sensing\n• ULQ™ extended battery life during system standby\n• Built-in output discharge function\n• Integrated power-good indicator\n• Fixed 600kHz switching frequency\n• 26A fixed OC limit\n• Fixed 1.0ms soft-start time\n• Large duty cycle operation\n• Cycle-by-cycle overcurrent protection\n• Latched output OV and UV protections\n• Non-latched UVLO and OT protections\n• –40°C to 125°C operating junction temperature\n• 19-pin 3.0mm × 4.0mm HotRod™ WQFN package\n• Create a custom design using the TPS51375 with the WEBENCH® Power Designer;

The device is a monolithic, 12A, synchronous buck converter with integrated MOSFETs that enable high efficiency and offer ease-of-use with minimum external component count for space-conscious power systems. \n\nThe TPS51375 employs D-CAP3 control mode that provides fast transient response and excellent line and load regulation with internal compensation. The ULQ extended battery life feature is extremely beneficial for long battery life in low power operation. The large duty operation greatly improves the load transient performance when input voltage is low. \n\nOther features include differential remote sensing, Eco-mode operation for high light load efficiency, VCC switch-over function for further optimized light load efficiency, and body braking for load transient improvement under low output voltage.\n\nTPS51375 supports VCCPRIM_VNNAON power rails in Intel Meteor Lake and Arrow Lake platform.\n\nThe TPS51375 integrates a power-good indicator and provides an output discharge function. The device provides complete protection, including OVP, UVP, OCP, OTP, and UVLO. The device is available in a 19-pin, 3.0mm × 4.0mm HotRod package, and the junction temperature is specified from –40°C to 125°C.

TPS51375_V01

TPS51375 4.5V to 24V, 12A Continuous Current, 26A Maximum Current, Synchronous Buck Converter

1Features •4.5Vto24Vinputvoltagerange •0.6Vto5.5Voutputvoltage •Integrated10mΩand5mΩFETs •Support12Acontinuousoutputcurrent •270uAlowquiescentcurrent •±1.0%referencevoltageaccuracy(25°C) •D-CAP3™controlmodearchitecturecontrolforfast transientresp

TPS51375H

具有遥感功能的 4.5V 至 24V、12A 连续电流 (29A Imax) 同步降压转换器; 4.5V to 24V input voltage range\n \n0.6V to 2V output voltage\n \nIntegrated 10mΩ and 5mΩ FETs\n \nSupports 14A continuous output current\n \n270uA low quiescent current\n \n±1% reference voltage accuracy (25°C)\n \nD-CAP3™ control mode architecture control for fast transient response optimizing 0.77V output\n \nSupport POSCAP and all MLCC output capacitor\n \nDifferential remote sensing\n \nULQ™ extended battery life during system standby\n \nBuilt-in output discharge function\n \nIntegrated power-good indicator\n \nFixed 600kHz switching frequency\n \n29A fixed OC limit\n \nFixed 1.0ms soft-start time\n \nLarge duty cycle operation\n \nCycle-by-cycle overcurrent protection\n \nLatched output OV and UV protections\n \nNon-latched UVLO and OT protections\n \n–40°C to 125°C operating junction temperature\n \n19-pin, 3.0mm × 4.0mm, HotRod™ WQFN package\n \nCreate a custom design using the TPS51375H with the WEBENCH Power Designer;

The device is a monolithic, 14A, synchronous buck converter with integrated MOSFETs that enable high efficiency and offer ease-of-use with minimum external component count for space-conscious power systems. The TPS51375H employs D-CAP3 control mode that provides fast transient response and excellent line and load regulation with internal compensation. The ULQ extended battery life feature is extremely beneficial for long battery life in low power operation. The large duty operation greatly improves the load transient performance when input voltage is low. \n\nOther features include differential remote sensing, Eco-mode operation for high light load efficiency, VCC switch-over function for further optimized light load efficiency, and body braking for load transient improvement under low output voltage. TPS51375H supports VCCPRIM_VNNAON power rails in Intel Meteor Lake and Arrow Lake platform.\n\nThe TPS51375H integrates a power-good indicator and provides an output discharge function. The device provides complete protection, including OVP, UVP, OCP, OTP, and UVLO. The device is available in a 19-pin, 3.0mm × 4.0mm HotRod package, and the junction temperature is specified from –40°C to 125°C.

TPS51375L

具有遥感功能的 4.5V 至 24V、12A 连续电流（17A 最大值）同步降压转换器; 4.5V to 24V input voltage range\n \n0.6V to 5.5V output voltage\n \nIntegrated 10mΩ and 5mΩ FETs\n \nSupports 12A continuous output current\n \n270uA low quiescent current\n \n±1% reference voltage accuracy (25°C)\n \nD-CAP3™ control mode architecture control for fast transient response\n \nSupport POSCAP and all MLCC output capacitor\n \nDifferential remote sensing\n \nULQ™ extended battery life during system standby\n \nBuilt-in output discharge function\n \nIntegrated power-good indicator\n \nFixed 600kHz switching frequency\n \n17A fixed OC limit\n \nFixed 1.0ms soft-start time\n \nLarge duty cycle operation\n \nCycle-by-cycle overcurrent protection\n \nLatched output OV and UV protections\n \nNon-latched UVLO and OT protections\n \n–40°C to 125°C operating junction temperature\n \n19-pin, 3.0mm × 4.0mm, HotRod™ WQFN package\n \nCreate a custom design using the TPS51375L with the WEBENCH Power Designer;

The device is a monolithic, 12A, synchronous buck converter with integrated MOSFETs that enable high efficiency and offer ease-of-use with minimum external component count for space-conscious power systems. The TPS51375L employs D-CAP3 control mode that provides fast transient response and excellent line and load regulation with internal compensation. The ULQ extended battery life feature is extremely beneficial for long battery life in low power operation. The large duty operation greatly improves the load transient performance when input voltage is low. \n\nOther features include differential remote sensing, Eco-mode operation for high light load efficiency, VCC switch-over function for further optimized light load efficiency, and body braking for load transient improvement under low output voltage. \n\nThe TPS51375L integrates a power-good indicator and provides an output discharge function. The device provides complete protection, including OVP, UVP, OCP, OTP, and UVLO. The device is available in a 19-pin, 3.0mm × 4.0mm HotRod package, and the junction temperature is specified from –40°C to 125°C.

TPS51375VBHR

丝印：51375；Package：WQFN-FCRLF；TPS51375 4.5V to 24V, 12A Continuous Current, 26A Maximum Current, Synchronous Buck Converter

1Features •4.5Vto24Vinputvoltagerange •0.6Vto5.5Voutputvoltage •Integrated10mΩand5mΩFETs •Support12Acontinuousoutputcurrent •270uAlowquiescentcurrent •±1.0%referencevoltageaccuracy(25°C) •D-CAP3™controlmodearchitecturecontrolforfast transientresp