DUAL HOT SWAP POWER CONTROLLERS WITH INDEPENDENT CIRCUIT BREAKER

1FEATURES • Dual-Channel High-Side MOSFET Drivers • IN1: 3 V to 13 V; IN2: 3 V to 5.5 V • Output dV/dt Control Limits Inrush Current • Independent Circuit-Breaker With Programmable Overcurrent Threshold and Transient Timer • CMOS- and TTL-Compatible Enable Input • Low, 5-μA Standby Supply

文件：688.34 Kbytes 页数：29 Pages

TI

德州仪器

DUAL HOT SWAP POWER CONTROLLERS WITH INDEPENDENT CIRCUIT BREAKER

文件：503.85 Kbytes 页数：26 Pages

TI

德州仪器

DUAL HOT SWAP POWER CONTROLLER WITH INDEPENDENT CIRCUIT BREAKER

文件：409.05 Kbytes 页数：22 Pages

TI

德州仪器

DUAL HOT SWAP POWER CONTROLLERS WITH INDEPENDENT CIRCUIT BREAKER

文件：503.85 Kbytes 页数：26 Pages

TI

德州仪器

DUAL HOT SWAP POWER CONTROLLERS WITH INDEPENDENT CIRCUIT BREAKER

文件：503.85 Kbytes 页数：26 Pages

TI

德州仪器

丝印：TPS2321I；Package：SOIC；DUAL HOT SWAP POWER CONTROLLERS WITH INDEPENDENT CIRCUIT BREAKER

1FEATURES • Dual-Channel High-Side MOSFET Drivers • IN1: 3 V to 13 V; IN2: 3 V to 5.5 V • Output dV/dt Control Limits Inrush Current • Independent Circuit-Breaker With Programmable Overcurrent Threshold and Transient Timer • CMOS- and TTL-Compatible Enable Input • Low, 5-μA Standby Supply

文件：688.34 Kbytes 页数：29 Pages

TI

德州仪器

丝印：TPS2321I；Package：SOIC；DUAL HOT SWAP POWER CONTROLLERS WITH INDEPENDENT CIRCUIT BREAKER

1FEATURES • Dual-Channel High-Side MOSFET Drivers • IN1: 3 V to 13 V; IN2: 3 V to 5.5 V • Output dV/dt Control Limits Inrush Current • Independent Circuit-Breaker With Programmable Overcurrent Threshold and Transient Timer • CMOS- and TTL-Compatible Enable Input • Low, 5-μA Standby Supply

文件：688.34 Kbytes 页数：29 Pages

TI

德州仪器

使能端高电平有效的 3V 至 13V 双通道热插拔

The TPS2320 and TPS2321 are dual-channel hot-swap controllers that use external N-channel MOSFETs as high-side switches in power applications. Features of these devices, such as overcurrent protection (OCP), inrush-current control, and the ability to discriminate between load transients and faults, • Dual-Channel High-Side MOSFET Drivers\n• IN1: 3 V to 13 V; IN2: 3 V to 5.5 V\n• Output dV/dt Control Limits Inrush Current\n• Independent Circuit-Breaker With Programmable Overcurrent Threshold and Transient Timer\n• CMOS- and TTL-Compatible Enable Input\n• Low, 5-µA Standby Supply Current (Max)\n;

TI

德州仪器

SINGLE HOT-SWAP POWER CONTROLLERS WITH CIRCUIT BREAKER AND POWER-GOOD REPORTING

1FEATURES • Single-Channel High-Side MOSFET Driver • Input Voltage: 3 V to 13 V • Output dV/dt Control Limits Inrush Current • Circuit-Breaker With Programmable Overcurrent Threshold and Transient Timer • Power-Good Reporting With Transient Filter • CMOS- and TTL-Compatible Enable Input •

文件：755.11 Kbytes 页数：29 Pages

TI

德州仪器

SINGLE HOT-SWAP POWER CONTROLLERS WITH CIRCUIT BREAKER AND POWER-GOOD REPORTING

1FEATURES • Single-Channel High-Side MOSFET Driver • Input Voltage: 3 V to 13 V • Output dV/dt Control Limits Inrush Current • Circuit-Breaker With Programmable Overcurrent Threshold and Transient Timer • Power-Good Reporting With Transient Filter • CMOS- and TTL-Compatible Enable Input •

文件：755.11 Kbytes 页数：29 Pages

TI

德州仪器