TLV75525PDRVR集成电路（IC）的线性+开关稳压器规格书PDF中文资料

1 Features

• Input voltage range: 1.45 V to 5.5 V

• Low IQ: 25 μA (typical)

• Low dropout:

– 238 mV (maximum) at 500 mA (3.3 VOUT)

• Output accuracy: 1 (maximum at 85°C)

• Built-in soft-start with monotonic VOUT rise

• Foldback current limit

• Active output discharge

• High PSRR: 46 dB at 100 kHz

• Stable with a 1-μF ceramic output capacitor

• Packages:

– 2.9-mm × 2.8-mm SOT-23-5

– 2.9-mm × 2.8-mm SOT-23-5 with thermal pad

(advance information only)

– 1-mm × 1-mm X2SON-4

– 2-mm × 2-mm WSON-6

2 Applications

• Set-top boxes, TV, and gaming consoles

• Portable and battery-powered equipment

• Desktops, notebooks, and ultrabooks

• Tablets and remote controls

• White goods and appliances

• Grid infrastructure and protection relays

• Camera modules and image sensors

TLV755P

IN

EN

OUT

GND

COUT

CIN

ON

OFF

Typical Application

Time (ms)

Voltage (V)

Output Current (mA)

0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2

0 0

1 25

2 50

3 75

4 100

5 125

6 150

7 175

VOUT VIN VEN IOUT

Start-Up Waveform

3 Description

The TLV755P is an ultra-small, low quiescent current,

low-dropout regulator (LDO) that sources 500 mA

with good line and load transient performance.

The TLV755P is optimized for a wide variety of

applications by supporting an input voltage range

from 1.45 V to 5.5 V. To minimize cost and solution

size, the device is offered in fixed output voltages

ranging from 0.6 V to 5 V to support the lower

core voltages of modern microcontrollers (MCUs).

Additionally, the TLV755P has a low IQ with enable

functionality to minimize standby power. This device

features an internal soft-start to lower inrush current,

thus providing a controlled voltage to the load and

minimizing the input voltage drop during start up.

When shutdown, the device actively pulls down the

output to quickly discharge the outputs and ensure a

known start-up state.

The TLV755P is stable with small ceramic output

capacitors allowing for a small overall solution size.

A precision band-gap and error amplifier provides

a typical accuracy of 1. All device versions

have integrated thermal shutdown, current limit, and

undervoltage lockout (UVLO). The TLV755P has an

internal foldback current limit that helps reduce the

thermal dissipation during short-circuit events.

The TLV755 is available in the popular WSON,

X2SON, and SOT23-5 (DRV, DQN, and DBV)

packages. This device is also available in a

thermally enhanced SOT23-5 (DYD) package with

a thermal pad that provides significantly reduced

thermal resistance compared to a standard SOT23-5

package.