TJA1083

FlexRay node transceiver

description TheTJA1083FlexRaynodetransceiveriscompliantwiththeFlexRayElectricalPhysicalLayerspecificationV3.0.1InordertomeetJASPARtheequirements,itimplementsthe‘Increasedvoltageamplitudetransmitter’functionalclass.Itisprimarilyintendedforcommunicationsystems

TJA1083GTT

FlexRay™ node transceiver - compliant with ISO 17458-4:2013; Optimized for time-triggered communication systems• Compliant with ISO 17458-4:2013 (see Ref. 2)\n• Automotive product qualification in accordance with AEC-Q100\n• Data transfer rates from 2.5 Mbit/s to 10 Mbit/s\n• Supports 60 ns minimum bit time at 400 mV differential input voltage\n• Very low ElectroMagnetic Emission (EME) to support unshielded cable, meeting the latest industry standards\n• Differential receiver with high common-mode range for excellent ElectroMagnetic Immunity (EMI), meeting the latest industry standards\n• Auto I/O level adaptation to host controller supply voltage VIO\n• Can be used in 14 V, 24 V and 48 V powered systems\n• Instant transmitter shut-down interface (BGE pin)\n;

The TJA1083G FlexRay™ node transceiver is compliant with the FlexRay Electrical Physical Layer specification ISO 17458-4:2013. It is primarily intended for communication systems operating at between 2.5 Mbit/s and 10 Mbit/s, and provides an advanced interface between the protocol controller and the physical bus in a FlexRay network.\nOffers an optimized solution for Electronic Control Unit applications that do not need enhanced power management.\nProvides a differential transmit capability to the network and a differential receive capability to the FlexRay controller. It offers excellent ElectroMagnetic Compatibility (EMC) performance as well as high ElectroStatic Discharge (ESD) protection.\n

恩XP

TJA1083G

FlexRay node transceiver

TJA1083GTT

FlexRay node transceiver

TJA1083TTJ

接口 - 专用 FlexRay node transceiver;

恩XP