3.3V, Burst Mode 1.25Gbps PECL High-Sensitivity Limiting Post Amplifier with TTL Loss-of-Signal

General Description The SY88903AL, burst mode, high-sensitivity limiting post amplifier is designed for use in fiber-optic receivers, specially optimized for passive optical networks (PONs). The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can

文件：333.57 Kbytes 页数：9 Pages

Micrel

麦瑞半导体

3.3V, Burst Mode 1.25Gbps PECL High-Sensitivity Limiting Post Amplifier with TTL Loss-of-Signal

General Description The SY88903AL, burst mode, high-sensitivity limiting post amplifier is designed for use in fiber-optic receivers, specially optimized for passive optical networks (PONs). The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can

文件：333.57 Kbytes 页数：9 Pages

Micrel

麦瑞半导体

3.3V, Burst Mode 1.25Gbps PECL High-Sensitivity Limiting Post Amplifier with TTL Loss-of-Signal

General Description The SY88903AL, burst mode, high-sensitivity limiting post amplifier is designed for use in fiber-optic receivers, specially optimized for passive optical networks (PONs). The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can

文件：333.57 Kbytes 页数：9 Pages

Micrel

麦瑞半导体

Limiting Amplifiers

The SY88903AL, burst mode, high-sensitivity limiting post amplifier is designed for use in fiber-optic receivers, specially optimized for passive optical networks (PONs). The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amoun Single 3.3V power supply\nFast LOS release/assert (<500ns) time for PON applications\n622Mbps to 1.25Gbps operation\nLow-noise PECL data outputs\nHigh gain LOS\nChatter-free Open-Collector TTL signal detect (LOS) output with internal 4.75kΩ pull-up resistor\nTTL /EN input\nProgrammable LOS level set;

Microchip

微芯科技