SRK1001数据手册集成电路（IC）的电源控制器监视器规格书PDF

描述 Description

The SRK1001 controller is designed for secondary side synchronous rectification (SR) in flyback converters, suitable for operation in QR and mixed CCM/DCM fixed frequency circuits.

It provides a high-current gate-drive output capable of driving N-channel Power MOSFETs.

The control scheme of this IC is such that the SR MOSFET is switched on as soon as current starts flowing through its body diode, and then switched off as current approaches zero.

The fast turn-on with minimum delay and innovative adaptive turn-off logic allow maximizing the conduction time of the SR MOSFET and eliminating the effect of parasitic inductance in the circuit.

The device enters low consumption mode when it detects primary controller burst-mode operation, or when the DIS pin is pulled up by the user, or when the SR MOSFET conduction falls below the programmed minimum TON. This improves the converter efficiency at light load, where synchronous rectification is no longer beneficial.

After the converter restarts switching or the DIS pin goes low again and the IC detects that the current conduction in the rectifiers has increased 20% above the min TON programmed value, the IC exits low consumption mode and resumes switching operation.

特性 Features

• Secondary side synchronous rectification controller optimized for flyback converter
• Suitable for QR and mixed CCM/DCM fixed frequency operation
• Wide VCC operating voltage range 3.7 to 32 V
• CC regulation operation down to 2V output supported
• Very low quiescent current in low consumption mode (170 µA)
• High-voltage sensing input for SR MOSFET drain-source voltage (185 V AMR)
• Operating frequency up to 300 kHz
• High-current gate-drive output for N-MOSFET
• Fast turn-on with minimum delay time and adaptive turn-off logic
• Programmable minimum TON and TOFF
• Low consumption mode entry by DIS pin, by primary side burst-mode detection or by detection of SR MOSFET conduction lower than programmed min. TON
• SO8 package