SN75160BDWRG4集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

SN75160BDWRG4属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的SN75160BDWRG4驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

Meets IEEE Standard 488-1978 (GPIB)

8-Channel Bidirectional Transceiver

Power-Up/Power-Down Protection

(Glitch Free)

High-Speed, Low-Power Schottky Circuitry

Low Power Dissipation . . . 72 mW Max Per

Channel

Fast Propagation Times . . . 22 ns Max

High-Impedance pnp Inputs

Receiver Hysteresis . . . 650 mV Typ

Open-Collector Driver Output Option

No Loading of Bus When Device Is

Powered Down (VCC = 0)

description

The SN75160B 8-channel general-purpose interface bus (GPIB) transceiver is a monolithic, high-speed,

low-power Schottky device designed for two-way data communications over single-ended transmission lines.

It is designed to meet the requirements of IEEE Standard 488-1978. The transceiver features driver outputs that

can be operated in either the passive-pullup or 3-state mode. If talk enable (TE) is high, these ports have the

characteristics of passive-pullup outputs when pullup enable (PE) is low and of 3-state outputs when PE is high.

Taking TE low places these ports in the high-impedance state. The driver outputs are designed to handle loads

up to 48 mA of sink current.

Output glitches during power up and power down are eliminated by an internal circuit that disables both the bus

and receiver outputs. The outputs do not load the bus when VCC = 0. When combined with the SN75161B or

SN75162B management bus transceivers, the pair provides the complete 16-wire interface for the IEEE-488

bus.

The SN75160B is characterized for operation from 0°C to 70°C.