DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

FEATURES · Available in the Texas Instruments NanoFree™ Package · Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation · Ioff Supports Partial Power-Down-Mode Operation · Sub-1-V Operable · Max tpd of 1.9 ns at 1.8 V · Low Power Consumption, 10-m

文件：656.33 Kbytes 页数：20 Pages

TI

德州仪器

DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

文件：278.75 Kbytes 页数：12 Pages

TI

德州仪器

DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

文件：535.18 Kbytes 页数：14 Pages

TI

德州仪器

双路正边沿触发式 D 型触发器

This single positive-edge-triggered D-type flip-flop is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the cloc • Available in the Texas Instruments NanoFree™ Package\n• Ioff Supports Partial Power-Down-Mode Operation\n• Max tpd of 1.9 ns at 1.8 V\n• ±8-mA Output Drive at 1.8 V\n• ESD Performance Tested Per JESD 22 \n• 200-V Machine Model (A115-A)\n• 1000-V Charged-Device Model (C101)\n \n NanoFree is a trad;

TI

德州仪器

丝印：2XD5；Package：SSOP；DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

FEATURES · Available in the Texas Instruments NanoFree™ Package · Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation · Ioff Supports Partial Power-Down-Mode Operation · Sub-1-V Operable · Max tpd of 1.9 ns at 1.8 V · Low Power Consumption, 10-m

文件：656.33 Kbytes 页数：20 Pages

TI

德州仪器

丝印：2XD5；Package：SSOP；DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

FEATURES · Available in the Texas Instruments NanoFree™ Package · Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation · Ioff Supports Partial Power-Down-Mode Operation · Sub-1-V Operable · Max tpd of 1.9 ns at 1.8 V · Low Power Consumption, 10-m

文件：656.33 Kbytes 页数：20 Pages

TI

德州仪器

丝印：U79Q；Package：VSSOP；DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

FEATURES · Available in the Texas Instruments NanoFree™ Package · Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation · Ioff Supports Partial Power-Down-Mode Operation · Sub-1-V Operable · Max tpd of 1.9 ns at 1.8 V · Low Power Consumption, 10-m

文件：656.33 Kbytes 页数：20 Pages

TI

德州仪器

丝印：U79Q；Package：VSSOP；DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

FEATURES · Available in the Texas Instruments NanoFree™ Package · Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation · Ioff Supports Partial Power-Down-Mode Operation · Sub-1-V Operable · Max tpd of 1.9 ns at 1.8 V · Low Power Consumption, 10-m

文件：656.33 Kbytes 页数：20 Pages

TI

德州仪器

DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

FEATURES · Available in the Texas Instruments NanoFree™ Package · Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation · Ioff Supports Partial Power-Down-Mode Operation · Sub-1-V Operable · Max tpd of 1.9 ns at 1.8 V · Low Power Consumption, 10-m

文件：656.33 Kbytes 页数：20 Pages

TI

德州仪器

DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP

FEATURES · Available in the Texas Instruments NanoFree™ Package · Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation · Ioff Supports Partial Power-Down-Mode Operation · Sub-1-V Operable · Max tpd of 1.9 ns at 1.8 V · Low Power Consumption, 10-m

文件：656.33 Kbytes 页数：20 Pages

TI

德州仪器