SN65LVDS1050PW集成电路（IC）的信号缓冲器、中继器、分离器规格书PDF中文资料

SN65LVDS1050PW属于集成电路（IC）的信号缓冲器、中继器、分离器。由美国德州仪器公司制造生产的SN65LVDS1050PW信号缓冲器、中继器、分离器信号缓冲器、中继器和分离器系列中的产品适用于远距离电气互连或电缆系统的数字信息传输。所有实际互连系统都具有非理想特性，该系列产品主要用于解决数字信息传输过程中因此造成的模拟问题。此外，还有其他功能，例如不同物理接口样式之间的转换和多路复用。

FEATURES

· Typically Meets or Exceeds ANSI

TIA/EIA-644-1995 Standard

· Operates From a Single 2.4-V to 3.6-V Supply

· Signaling Rates up to 400 Mbit/s

· Bus-Terminal ESD Exceeds 12 kV

· Low-Voltage Differential Signaling With Typical

Output Voltages of 285 mV and a 100-W

Load

· Propagation Delay Times

· Driver: 1.7-ns Typical

· Receiver: 3.7-ns Typical

· Driver: 25-mW Typical

· Receiver: 60-mW Typical

· Power Dissipation at 200 MHz

· Driver: 25-mW Typical

· Receiver: 60-mW Typical

· LVTTL Input Levels Are 5-V Tolerant

· Receiver Maintains High Input Impedance

· Receiver Has Open-Circuit Fail Safe

· Available in Thin Shink Outline Packaging

With 20-mil Lead Pitch

DESCRIPTION

The SN65LVDS1050 is similar to the SN65LVDS050

except that it is characterized for operation with a lower

supply voltage range and packaged in the thin shrink

outline package for portable battery-powered applications.

The differential line drivers and receivers use low-voltage differential signaling (LVDS) to achieve signaling rates as

high as 400 Mbps. The drivers provide a minimum differential output voltage magnitude of 247 mV into a 100-W load

and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.

The intended application of this device and signaling technique is for point-to-point baseband data transmission

over controlled impedance media of approximately 100-W characteristic impedance. The transmission media may

be printed-circuit board traces, backplanes, or cables. Note: The ultimate rate and distance of data transfer is

dependent upon the attenuation characteristics of the media, the noise coupling to the environment and other

application-specific characteristics.

The SN65LVDS1050 is characterized for operation from -40°C to 85°C.