5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) encoder/decoder

文件：302.03 Kbytes 页数：58 Pages

PHI

飞利浦

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) encoder/decoder

文件：302.03 Kbytes 页数：58 Pages

PHI

飞利浦

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) encoder/decoder

文件：302.03 Kbytes 页数：58 Pages

PHI

飞利浦

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) encoder/decoder

文件：302.03 Kbytes 页数：58 Pages

PHI

飞利浦

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) encoder/decoder

文件：302.03 Kbytes 页数：58 Pages

PHI

飞利浦

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) encoder/decoder

文件：302.03 Kbytes 页数：58 Pages

PHI

飞利浦

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) encoder/decoder

The SC16C654B/654DB is a Quad Universal Asynchronous Receiver and Transmitter (QUART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. It comes with an Intel or Motorola inte 4 channel UART\n5 V, 3.3 V and 2.5 V operation\nIndustrial temperature range (-40 Cel to +85 Cel)\nSC16C654B is pin and software compatible with the industry-standard ST16C454/554, ST16C654, ST68C454/554, TL16C554\nSC16C654DB is pin and software compatible with ST16C654D, and software compatible wit;

恩XP

恩智浦

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) encoder/decoder

The SC16C654B/654DB is a Quad Universal Asynchronous Receiver and Transmitter (QUART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. It comes with an Intel or Motorola inte 4 channel UART\n5 V, 3.3 V and 2.5 V operation\nIndustrial temperature range (-40 Cel to +85 Cel)\nSC16C654B is pin and software compatible with the industry-standard ST16C454/554, ST16C654, ST68C454/554, TL16C554\nSC16C654DB is pin and software compatible with ST16C654D, and software compatible wit;

恩XP

恩智浦

5 V、3.3 V和2.5 V的四通道UART，5 Mbit/s(最快)，带有64字节FIFO以及红外(IrDA)编码器/解码器

SC16C654B/654DB是一款四通道通用异步接收器和发送器(QUART)，用于串行数据通信。其主要功能是将并行数据转换成串行数据或将串行数据转换成并行数据。UART可处理最高5 Mbit/s的串行数据速率。附带Intel或Motorola接口。\n SC16C654B/654DB的引脚兼容ST16C654和TL16C754，其功能等同于16C454。对控制寄存器进行编程可启用SC16C654B/654DB的附加功能。其中一些附加功能为64字节接收和发送FIFO、自动硬件或软件流控制以及红外编码/解码。可选的自动流控制功能通过使用RTS输出和CTS输入信号自动控制串行数据流，在FIFO模式 4通道UART\n 工作电压为5 V、3.3 V和2.5 V\n 工业温度范围(-40℃至+85℃)\n SC16C654B的引脚和软件兼容行业标准ST16C454/554、ST16C654、ST68C454/554、TL16C554\n SC16C654DB的引脚和软件兼容ST16C654D，且软件兼容ST16C454/554、ST68C454/554、TL16C554\n 数据速率在5 V和3.3 V时最快为5 Mbit/s而在2.5 V时最快为3 Mbit/s\n 5 V容限的输入\n 64字节发送FIFO\n 带有误差标志的64字节接收FIFO\n 自动软件(Xon/Xoff)/硬件(;

恩XP

恩智浦