SAK-TC1197-256F180E中文资料英飞凌数据手册PDF规格书

Summary of Features

• High-performance 32-bit super-scalar TriCore V1.3.1 CPU with 4-stage pipeline

– Superior real-time performance

– Strong bit handling

– Fully integrated DSP capabilities

– Single precision Floating Point Unit (FPU)

– 180 MHz operation at full temperature range

• 32-bit Peripheral Control Processor with single cycle instruction (PCP2)

– 16 Kbyte Parameter Memory (PRAM)

– 32 Kbyte Code Memory (CMEM)

– 180 MHz operation at full temperature range

• Multiple on-chip memories

– 4 or 21) Mbyte Program Flash Memory (PFLASH) with ECC

– 64 Kbyte Data Flash Memory (DFLASH) usable for EEPROM emulation

– 128 Kbyte Data Memory (LDRAM)

– 40 Kbyte Code Scratchpad Memory (SPRAM)

– Instruction Cache: up to 16 Kbyte (ICACHE, configurable)

– Data Cache: up to 4 Kbyte (DCACHE, configurable)

– 8 Kbyte Overlay Memory (OVRAM)

– 16 Kbyte BootROM (BROM)

• 16-Channel DMA Controller

• 32-bit External Bus Interface Unit (EBU) with

– 32-bit demultiplexed / 16-bit multiplexed external bus interface (3.3V, 2.5V)

– Support for Burst Flash memory devices

– Scalable external bus timing up to 75 MHz

• Sophisticated interrupt system with 2 × 255 hardware priority arbitration levels

serviced by CPU or PCP2

• High performing on-chip bus structure

– 64-bit Local Memory Buses between CPU, EBU, Flash and Data Memory

– 32-bit System Peripheral Bus (SPB) for on-chip peripheral and functional units

– One bus bridges (LFI Bridge)

• Versatile On-chip Peripheral Units

– Two Asynchronous/Synchronous Serial Channels (ASC) with baud rate generator,

parity, framing and overrun error detection

– Two High-Speed Synchronous Serial Channels (SSC) with programmable data

length and shift direction

– Two serial Micro Second Bus interface (MSC) for serial port expansion to external

power devices

– Two High-Speed Micro Link interface (MLI) for serial inter-processor

communication

– One MultiCAN Module with 4 CAN nodes and 128 free assignable message

objects for high efficiency data handling via FIFO buffering and gateway data

transfer

– Two General Purpose Timer Array Modules (GPTA) with additional Local Timer

Cell Array (LTCA2) providing a powerful set of digital signal filtering and timer

functionality to realize autonomous and complex Input/Output management

• 44 analog input lines for ADC

– 3 independent kernels (ADC0, ADC1, ADC2)

– Analog supply voltage range from 3.3 V to 5 V (single supply)

– Performance for 12 bit resolution (@fADCI = 10 MHz)

• 4 different FADC input channels

– channels with impedance control and overlaid with ADC1 inputs

– Extreme fast conversion, 21 cycles of fFADC clock (262.5 ns @ fFADC = 80 MHz)

– 10-bit A/D conversion (higher resolution can be achieved by averaging of

consecutive conversions in digital data reduction filter)

• 221 digital general purpose I/O lines1) (GPIO), 4 input lines

• Digital I/O ports with 3.3 V capability

• On-chip debug support for OCDS Level 1 (CPU, PCP, DMA, On Chip Bus)

• Dedicated Emulation Device chip available (TC1797ED)

– multi-core debugging, real time tracing, and calibration

– four/five wire JTAG (IEEE 1149.1) or two wire DAP (Device Access Port) interface

• Power Management System

• Clock Generation Unit with PLL

• Core supply voltage of 1.5 V

• I/O voltage of 3.3 V

• Temperature range: -40° to +125°C

• Package variants: PG-BGA-416-10