RN1810数据手册RF/IF射频/中频RFID的射频收发器模块调制解调器规格书PDF

描述 Description

The RN1810 is an ultra-low power, 2.4 GHz IEEE 802.11b/g/n surface mount module. This small form factor module is a complete Wi-Fi solution with on-board TCP/IP networking stack, integrated PCB trace antenna, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier. The RN1810 is fully-certified, freeing the designer from RF and antenna design regulatory compliance testing, which provides faster time to market. The RN1810 is configured with a simple ASCII command language which speeds up prototyping and shortens development time. In the simplest configuration, the module requires only power, ground and UART TX and RX connections. With the RN1810, designers can embed Wi-Fi and networking functionality rapidly into virtually any device. The RN1810 provides cost and time-to-market savings as a self-contained Internet-enabling solution. The module has been designed to provide designers with a simple Wi-Fi solution that features:
• Ease of integration and programming
• Vastly reduced development time
• Minimum system cost
• Long battery life
• Maximum value in a range of applications The RN1810 has an integrated PCB trace antenna (Part Number RN1810-I/RM100) and the RN1810E has an ultra-small W.FL connector for external antennas (Part Number RN1810E-I/RM100) For the latest firmware details and corresponding part numbers, please visit: https://www.microchip.com/en-us/products/wireless-connectivity

特性 Features

Low Power IEEE 802.11b/g/n Wi-Fi module
UART Interface to Host Controller
Configured using simple ASCII commands
Integrates easily into final product - Minimizes product development & provides quick time to Market
Fully integrated wireless module with voltage regulation, crystal, RF matching circuitry, Power Amplifier (PA), Low Noise Amplifier (LNA), and PCB Trace Antenna
Ultra-small W.FL connector for external antennas (RN1810E)
Compact surface mount module: 0.700\" x 1.050\" x 0.085\" (17.8 mm x 26.7 mm x 2.2 mm)
Castellated Surface Mount Pads for easy and reliable PCB mounting
Environmentally Friendly, RoHS Compliant
FCC (USA) and IC (Canada) Certified

简介

RN1810属于RF/IF射频/中频RFID的射频收发器模块调制解调器。由制造生产的RN1810射频收发器模块和调制解调器RF 收发器模块用于发送和/或接收射频信号。射频系列/标准有蓝牙、蜂窝、通用 ISM、GPS、导航、SiBeam、WiFi 和 802.15.4，频率范围为 70 MHz 至 65 GHz。数据速率为 600 bps 到 12.3 Gbps，功率输出为 -10 dBm 到 54 dBm。