Maintenance and control device

DESCRIPTION The PTN3500 is a general purpose maintenance and control device. It features an on-board E2PROM that can be used to store error codes or board manufacturing data for read–back by application software for diagnostic purposes. The eight quasi bidirectional data pins can be independ

文件：115.39 Kbytes 页数：15 Pages

PHI

飞利浦

Maintenance and control device

DESCRIPTION\nThe PTN3500 is a general purpose maintenance and control device. It features an on-board E2PROM that can be used to store error codes or board manufacturing data for read–back by application software for diagnostic purposes.\nThe eight quasi bidirectional data pins can be independently • I2C to parallel port expander\n• Internal 256x8 E2PROM\n• Self timed write cycle (5 ms typ.)\n• Four byte page write operation\n• Controlled pull-up on address lines\n• Low voltage VCC range of +2.5 V to +3.6 V\n• 5 V – tolerant I/Os\n• Low standby current (< 60 µA )\n• Power on Reset\n• Supports ;

恩XP

恩智浦

Maintenance and control device

DESCRIPTION The PTN3500 is a general purpose maintenance and control device. It features an on-board E2PROM that can be used to store error codes or board manufacturing data for read–back by application software for diagnostic purposes. The eight quasi bidirectional data pins can be independ

文件：115.39 Kbytes 页数：15 Pages

PHI

飞利浦

Maintenance and control device

DESCRIPTION The PTN3500 is a general purpose maintenance and control device. It features an on-board E2PROM that can be used to store error codes or board manufacturing data for read–back by application software for diagnostic purposes. The eight quasi bidirectional data pins can be independ

文件：115.39 Kbytes 页数：15 Pages

PHI

飞利浦

PTN3500AD

Overview

恩XP

恩智浦

PTN3500D

Overview

恩XP

恩智浦