Features and benefits

• Transmitter current up to 250 mA

• Dynamic Power Control (DPC) for optimized RF performance, even under detuned antenna conditions

• Adaptive Waveform Control (AWC) automatically adjusts the transmitter modulation for RF compliancy

• Adaptive Receiver Control (ARC) automatically adjusts the receiver parameters for always reliable

communication

• Includes NXP ISO/IEC14443-A and Innovatron ISO/IEC14443-B intellectual property licensing rights

• Full compliancy with all standards relevant to NFC, contactless operation and EMVCo 3.1 L1

• Active load modulation supports smaller antenna in Card Emulation Mode

• Automatic EMD handling performed without host interaction relaxes the timing requirements on the Host

Controller

• Low-power card detection (LPCD) minimizes current consumption during polling

• Automatic support of system LDO or system DC-DC power-down mode during LPCD

• Zero-Power-Wake-up

• Small, industry-standard packages

• NFC Cockpit: PC-based support tool for fast configuration of register settings

• Development kit with 32-bit NXP LPC1769 MCU and antenna

• NFC Reader Library with source code ready for EMVCo 3.1 L1 and NFC Forum compliance

Applications

• Payment

• Physical-access

• eGov

• Industrial

PN5180A0ET/C3J属于RF/IF，射频/中频和 RFID > RFID，射频接入，监控 IC。恩智浦半导体公司制造生产的PN5180A0ET/C3JRFID，射频接入，监控 ICRFID 或射频接入监控 IC 是配置为射频识别 (RFID) 读取器、应答器、无源接入/无源启动处理器和轮胎压力监测系统 (TPMS) 的半导体器件。这些器件的设计符合 EPC、ISO、NFC、MiFARE 和 FeliCa 等特定 RFID 标准，并通过 I2C、SPI、UART、USB、PWM、RS232、RS422、RS485 及其他接口进行通信。