2-bit I2C-bus LED driver with programmable blink rates

General description The PCA9550 LED blinker blinks LEDs in I2C-bus and SMBus applications where it is necessary to limit bus traffic or free up the I2C masters (MCU, MPU, DSP, chip set, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To bli

文件：149.68 Kbytes 页数：26 Pages

恩XP

2-bit I2C LED driver with programmable blink rates

DESCRIPTION The PCA9550 LED Blinker blinks LEDs in I2C-bus and SMBus applications where it is necessary to limit bus traffic or free up the I2C Master’s (MCU, MPU, DSP, chipset, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To blink LEDs

文件：130.009 Kbytes 页数：17 Pages

PHI

飞利浦

2-bit I2C LED driver with programmable blink rates

DESCRIPTION The PCA9550 LED Blinker blinks LEDs in I2C-bus and SMBus applications where it is necessary to limit bus traffic or free up the I2C Master’s (MCU, MPU, DSP, chipset, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To blink LEDs

文件：130.009 Kbytes 页数：17 Pages

PHI

飞利浦

2-bit I2C-bus LED driver with programmable blink rates

General description The PCA9550 LED blinker blinks LEDs in I2C-bus and SMBus applications where it is necessary to limit bus traffic or free up the I2C masters (MCU, MPU, DSP, chip set, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To bli

文件：149.68 Kbytes 页数：26 Pages

恩XP

2-bit I²C-bus LED driver with programmable blink rates

The PCA9550 LED blinker blinks LEDs in I²C-bus and SMBus applications where it is necessary to limit bus traffic or free up the I²C master's (MCU, MPU, DSP, chipset, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To blink LEDs using normal I/ • 2 LED drivers (on, off, flashing at a programmable rate)\n• 2 selectable, fully programmable blink rates (frequency and duty cycle) between 0.172 Hz and 44 Hz (5.82 seconds and 0.023 seconds)\n• Input/output not used as LED drivers can be used as regular GPIOs\n• Internal oscillator requires no ex;

恩XP

恩智浦

2-bit I²C-bus LED driver with programmable blink rates

The PCA9550 LED blinker blinks LEDs in I²C-bus and SMBus applications where it is necessary to limit bus traffic or free up the I²C master's (MCU, MPU, DSP, chipset, etc.) timer. The uniqueness of this device is the internal oscillator with two programmable blink rates. To blink LEDs using normal I/ • 2 LED drivers (on, off, flashing at a programmable rate)\n• 2 selectable, fully programmable blink rates (frequency and duty cycle) between 0.172 Hz and 44 Hz (5.82 seconds and 0.023 seconds)\n• Input/output not used as LED drivers can be used as regular GPIOs\n• Internal oscillator requires no ex;

恩XP

恩智浦