P82B96D

DUAL BIDIRECTIONAL BUS BUFFER

P82B96D

DUAL BIDIRECTIONAL BUS BUFFER

P82B96D

I2C Compatible Dual Bidirectional Bus Buffer

P82B96D

Package：8-SOIC（0.154"，3.90mm 宽）；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：集成电路（IC） 信号缓冲器、中继器、分离器 描述：IC REDRIVER I2C 1CH 400KHZ 8SOIC

P82B96DP

Dual bidirectional bus buffer; Bidirectional data transfer of IC-bus signals\nIsolates capacitance allowing 400 pF on Sx/Sy side and 4000 pF on Tx/Ty side\nTx/Ty outputs have 60 mA sink capability for driving low-impedance or high capacitive buses\n400 kHz operation over at least 20 meters of wire (see AN10148)\nSupply voltage range of 2 V to 15 V with IC-bus logic levels on Sx/Sy side independent of supply voltage\nSplits IC-bus signal into pairs of forward/reverse Tx/Rx, Ty/Ry signals for interface with opto-electrical isolators and similar devices that need unidirectional input and output signal paths.\nLow power supply current\nESD protection exceeds 3500 V HBM per JESD22-A114, 250 V DIP package, 400 V SO package MM per JESD22-A115, and 1000 V CDM per JESD22-C101\nLatch-up free (bipolar process with no latching structures)\nPackages offered: DIP8, SO8 and TSSOP8\n;

The P82B96 is a bipolar IC that creates a non-latching, bidirectional, logic interface between the normal IC-bus and a range of other bus configurations. It can interface IC-bus logic signals to similar buses having different voltage and current levels.\nFor example, it can interface to the 350 A SMBus, to 3.3 V logic devices, and to 15 V levels and/or low-impedance lines to improve noise immunity on longer bus lengths.\nIt achieves this interface without any restrictions on the normal IC-bus protocols or clock speed. The IC adds minimal loading to the IC-bus node, and loadings of the new bus or remote IC-bus nodes are not transmitted or transformed to the local node. Restrictions on the number of IC-bus devices in a system, or the physical separation between them, are virtually eliminated. Transmitting SDA and SCL signals via balanced transmission lines (twisted pairs) or with galvanic isolation (opto-coupling) is simple because separate directional Tx and Rx signals are provided. The Tx and Rx signals may be directly connected, without causing latching, to provide an alternative bidirectional signal line with IC-bus properties.\n

恩XP

P82B96DP

Dual bi-directional bus buffer

DESCRIPTION TheP82B96isabipolarICthatcreatesanon-latching,bi-directional,logicinterfacebetweenthenormalI2C-busandarangeofotherbusconfigurations.ItcaninterfaceI2C-buslogicsignalstosimilarbuseshavingdifferentvoltageandcurrentlevels. Forexampleitcaninte

PHI

P82B96DG4

DUAL BIDIRECTIONAL BUS BUFFER

P82B96DG4

DUAL BIDIRECTIONAL BUS BUFFER

P82B96DG4

I2C Compatible Dual Bidirectional Bus Buffer

P82B96DGKR

DUAL BIDIRECTIONAL BUS BUFFER