10-CHARACTER 3-LINE DOT MATRIX LCD CONTROLLER DRIVER?

■ GENERAL DESCRIPTION The NJU6424 is a Dot Matrix LCD controller Driver for 10-character 3-line with icon display maximum by itself. It operates from 2.4V power supply and it contains voltage Tripler, bleeder resistance to generate about triple voltage (9V) and the bias for LCD Driving waveform

文件：1.2333 Mbytes 页数：37 Pages

NJRC

日本无线

10字符3行点矩阵LCD控制驱动器

NJU6424是点矩阵LCD控制驱动器，单芯片可用于带图标的10字符3行显示。它包含电压三倍器、泄放电阻、偏压控制电路、CR振荡器、微处理器接口电路、指令解码控制器、字符生成器ROM/RAM和高电压工作common和segment驱动器。电压三倍器和泄放电阻将单电源（3V）转换为大约3倍的电压（8V）和用于内部LCD驱动波形的偏置电压。所以，尽管电源电路简单，仍可实现高对比度显示。偏压控制电路可改变电压跟随器的输出电流，所以可以提高COM/SEG驱动能力。CR振荡器集成C和R，所以振荡无需外接组件。微处理器接口电路以1MHz频率工作，可直接连接到4/8位微处理器。字符生成器包含9，600位RO • 10字符3行点矩阵LCD控制驱动器\n• 最多显示100个图标 (COMMK1，COMMK2)\n• 4/8位微处理器直接接口\n• 显示数据RAM-30×8位 (最多10字符3行显示)\n• 字符生成器ROM-9，600位 (240个5×7点的字符)\n• 字符生成器RAM-32×5位 (4图案（5×7点）)\n• 高电压LCD驱动器 (26Common/50Segment)\n• 有用的指令集 (清屏、返回首页、显示ON/OFF控制、游标ON/OFF控制、闪烁显示、游标移位、字符移位)\n• 加电初始化\n• 硬件复位功能\n• 芯片集成电压三倍器\n• 芯片集成带电压跟随器的泄放电阻;

Nisshinbo

日清纺微电子

10-CHARACTER 3-LINE DOT MATRIX LCD CONTROLLER DRIVER?

■ GENERAL DESCRIPTION The NJU6424 is a Dot Matrix LCD controller Driver for 10-character 3-line with icon display maximum by itself. It operates from 2.4V power supply and it contains voltage Tripler, bleeder resistance to generate about triple voltage (9V) and the bias for LCD Driving waveform

文件：1.2333 Mbytes 页数：37 Pages

NJRC

日本无线

10-CHARACTER 3-LINE DOT MATRIX LCD CONTROLLER DRIVER?

■ GENERAL DESCRIPTION The NJU6424 is a Dot Matrix LCD controller Driver for 10-character 3-line with icon display maximum by itself. It operates from 2.4V power supply and it contains voltage Tripler, bleeder resistance to generate about triple voltage (9V) and the bias for LCD Driving waveform

文件：1.2333 Mbytes 页数：37 Pages

NJRC

日本无线

10-character/3-line Dot Matrix LCD

Nisshinbo

日清纺微电子