Temperature and voltage monitor

GENERAL DESCRIPTION The NE1619 is designed for monitoring the temperatures and supply voltages of microprocessor-based systems by measuring those parameters and comparing the readings with programmable limits. The device provides five possible analog inputs, a remote temperature sensor input an

文件：167.42 Kbytes 页数：2 Pages

PHI

飞利浦

Smart, simple solutions for the 12 most common design concerns

文件：727.81 Kbytes 页数：8 Pages

恩XP

Smart, simple solutions for the 12 most common design concerns

文件：727.81 Kbytes 页数：8 Pages

恩XP

Precise thermal monitoring with small, accurate temp sensors

文件：258.19 Kbytes 页数：2 Pages

PHI

飞利浦

包装：盒 类别：电缆，电线 - 管理 电缆支撑与紧固件 描述：CBL CLAMP P-TYPE FASTENER

Essentra

益升华

Temperature monitor for microprocessor systems

General description\nThe NE1617A is an accurate two-channel temperature monitor. It measures the temperature of itself and the temperature of a remote sensor. The remote sensor is a diode connected transistor. This can be in the form of either a discrete NPN/PNP, such as the 2N3904/2N3906, or a diod

恩XP

恩智浦

Temperature monitor for microprocessor systems

DESCRIPTION\nThe NE1617 is an accurate two-channel temperature monitor. It measures the temperature of itself and the temperature of a remote sensor. The remote sensor is a diode connected transistor. This can be in the form of either a discrete NPN/PNP, such as the 2N3904/2N3906, or a diode connect • Replacement for Maxim MAX1617 and Analog Devices ADM1021\n• Monitors local and remote temperature\n• Accuracy\n   – ± 2°C local (on-chip) sensor\n   – ± 3°C remote sensor\n• No calibration required\n• Programmable over/under temperature alarm\n• SMBus 2-wire serial interface\n• 3V to 5.5V supply r;

恩XP

恩智浦

Temperature monitor for microprocessor systems

DESCRIPTION\nThe NE1618 is an accurate two-channel temperature monitor. It measures the temperature of itself and the temperature of a remote sensor. It can replace the NE1617 for a more precise measurement to the remote temperature when it operates in extended mode. The remote sensor is a diode con • Monitors local and remote temperature\n• Accuracy\n   – ± 2 °C local (on-chip) sensor\n   – ± 1.5 °C remote sensor with 1 °C resolution\n   – ± 1.0 °C remote sensor with 0.125 °C resolution\n• No calibration required\n• Programmable over/under temperature alarm\n• SMBus 2-wire serial interface\n• ;

恩XP

恩智浦

包装：管件 类别：连接器，互连器件 线对板 描述：TERM BLOCK 16POS 45DEG 5MM PCB

Amphenol Anytek

包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：连接器，互连器件 线对板 描述：TERM BLOCK 16POS 45DEG 7.5MM PCB

Amphenol Anytek