Very Low Supply Current 3-Pin Microprocessor Reset Monitor

文件：55.25 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

Very Low Supply Current 3-Pin Microprocessor Reset Monitor

文件：108.51 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

Very Low Supply Current 3-Pin Microprocessor Reset Monitor

文件：52.95 Kbytes 页数：6 Pages

ONSEMI

安森美半导体

Very Low Supply Current 3-Pin Microprocessor Reset Monitor

文件：135.9 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

Very Low Supply Current 3-Pin Microprocessor Reset Monitor

文件：97.34 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

Voltage Supervisor, 3-Pin, Microprocessor, Very Low Supply Current, Reset Monitor

The MAX803/NCP803 is a cost-effective system supervisor circuit designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 10 µsec of VCC falling through the reset volta • Precision VCC Monitor for 1.5 V, 1.8V, 2.5 V, 3.0 V, 3.3 V and 5.0 V supplies\n• Precision Monitoring Voltages from 1.2 V to 4.9 V Available in 100 mV Steps\n• Four Guaranteed Minimum RESET Output Duration(1ms, 20ms, 100ms and 140ms)\n• RESET Output Guaranteed to VCC = 1.0 V\n• Low 0.5 uA Supply C;

ONSEMI

安森美半导体

Very Low Supply Current 3-Pin Microprocessor Reset Monitor

The MAX803/NCP803 is a cost-effective system supervisor circuit designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The MAX803/NCP803 is optimized to reject fast transient glitches on the VCC line. Low su

文件：86.44 Kbytes 页数：9 Pages

ONSEMI

安森美半导体

Very Low Supply Current 3-Pin Microprocessor Reset Monitor

The MAX803/NCP803 is a cost-effective system supervisor circuit designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The MAX803/NCP803 is optimized to reject fast transient glitches on the VCC line. Low su

文件：86.44 Kbytes 页数：9 Pages

ONSEMI

安森美半导体

Very Low Supply Current 3-Pin Microprocessor Reset Monitor

The MAX803/NCP803 is a cost-effective system supervisor circuit designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The MAX803/NCP803 is optimized to reject fast transient glitches on the VCC line. Low su

文件：86.44 Kbytes 页数：9 Pages

ONSEMI

安森美半导体

Very Low Supply Current 3-Pin Microprocessor Reset Monitor

The MAX803/NCP803 is a cost-effective system supervisor circuit designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The MAX803/NCP803 is optimized to reject fast transient glitches on the VCC line. Low su

文件：86.44 Kbytes 页数：9 Pages

ONSEMI

安森美半导体