Description

The N24RF16E is a RFID/NFC tag with a 16 Kb EEPROM device,

offering both contactless and contact interface. In addition to the

ISO/IEC 15693 radio frequency identification (RFID) interface

protocol, the device features an I2C interface to communicate with

a microcontroller. The I2C contact interface requires an external

power supply.

The 16 Kb EEPROM array is internally organized as 512 x 32 bits in

RF mode and as 2048 x 8 bits when accessed from the I2C interface.

Features

• Contactless Transmission of Data

• ISO 15693 / ISO 18000−3 Mode1 Compliant

♦ Vicinity Range Communication (up to 150 cm)

♦ Air Interface Communication at 13.56 MHz (HF)

♦ To Tag: ASK Modulation with 1.65 Kbit/s or 26.48 Kbit/s Data

Rate

♦ From Tag: Load Modulation Using Manchester Coding with

423 kHz and 484 kHz Subcarriers in Low (6.6 Kbit/s) or High

(26 Kbit/s) Data Rate Mode. Supports the 53 Kbit/s Data Rate

with Fast Commands

• Read & Write 32−bit Block Mode

• Anti−collision Support

• Security:

♦ 64−bit Unique Identifier (UID)

♦ Multiple 32−bit Passwords and Lock Feature for Each User

Memory Sector

• Supports Fast (400 kHz) and Fast−Plus (1 MHz) I2C Protocol

• 1.8 V to 5.5 V Supply Voltage Range

• 4−Byte Page Write Buffer

• I2C Timeout

• Schmitt Triggers and Noise Suppression Filters on I2C Bus Inputs

(SCL and SDA)

• 512 Blocks x 32 Bits (16 Sectors of 32 Blocks Each): RF Mode

• 2048 x 8 Bits I2C Mode

• 2,000,000 Program/Erase Cycles

• 200 Year Data Retention

• −40C to +105C Temperature Range

• Configurable Output Pin: RF Write in Progress or RF Busy

• Energy Harvesting Analog Output

• SOIC, TSSOP 8−lead Packages

• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS

Compliant*

N24RF16EDWPT3G属于RF/IF，射频/中频和 RFID > RFID，射频接入，监控 IC。安森美半导体公司制造生产的N24RF16EDWPT3GRFID，射频接入，监控 ICRFID 或射频接入监控 IC 是配置为射频识别 (RFID) 读取器、应答器、无源接入/无源启动处理器和轮胎压力监测系统 (TPMS) 的半导体器件。这些器件的设计符合 EPC、ISO、NFC、MiFARE 和 FeliCa 等特定 RFID 标准，并通过 I2C、SPI、UART、USB、PWM、RS232、RS422、RS485 及其他接口进行通信。