MX29F200CTTI-70G集成电路（IC）的存储器规格书PDF中文资料

MX29F200CTTI-70G属于集成电路（IC）的存储器。由旺宏电子股份有限公司制造生产的MX29F200CTTI-70G存储器存储器是集成电路上用作数据存储设备的半导体器件。这些器件分为非易失性或易失性两种，格式包括 CBRAM、DRAM、EEPROM、EERAM、EPROM、闪存、FRAM、NVSRAM、PCM (PRAM)、PSRAM、RAM 和 SRAM。这些器件的存储容量为 64 b 至 6 Tb 不等，接口有 I2C、MMC、并行、eMMC、串行、单线、SPI、UFS、Xccela 总线和 1-线。

FEATURES

GENERAL FEATURES

• Single Power Supply Operation

- 4.5 to 5.5 volt for read, erase, and program operations

• 262,144 x 8 / 131,072 x 16 switchable

• Boot Sector Architecture

- T = Top Boot Sector

- B = Bottom Boot Sector

• Sector Structure

- 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1, and 64K-Byte x 3

• Sector protection

- Hardware method to disable any combination of sectors from program or erase operations

- Temporary sector unprotected allows code changes in previously locked sectors

• Latch-up protected to 100mA from -1V to Vcc + 1V

• Compatible with JEDEC standard

- Pinout and software compatible to single power supply Flash

PERFORMANCE

• High Performance

- Access time: 70/90ns

- Byte/Word program time: 9us/11us (typical)

- Erase time: 0.7s/sector, 4s/chip (typical)

• Low Power Consumption

- Low active read current: 40mA (maximum) at 5MHz

- Low standby current: 1uA (typical)

• Minimum 100,000 erase/program cycle

• 20 years data retention

SOFTWARE FEATURES

• Erase Suspend/ Erase Resume

- Suspends sector erase operation to read data from or program data to another sector which is not being erased

• Status Reply

- Data# Polling & Toggle bits provide detection of program and erase operation completion

HARDWARE FEATURES

• Ready/Busy# (RY/BY#) Output

- Provides a hardware method of detecting program and erase operation completion

• Hardware Reset (RESET#) Input

- Provides a hardware method to reset the internal state machine to read mode