MT9076B中文资料T1/E1/J1 3.3 V Single Chip Transceiver数据手册Microchip规格书

描述 Description

The MT9076 is a highly featured single chip solution for terminating T1/E1/J1 trunks. It contains a long-haul LIU, an advanced framer, a high performance PLL and 3 HDLCs.
In T1 mode, the MT9076 supports D4, ESF and SLC-96 formats meeting the latest recommendations including AT&T PUB43801, TR-62411; ANSI T1.102, T1.403 and T1.408; Telcordia GR-303-CORE.
In E1 mode, the MT9076 supports the latest ITU-T Recommendations including G.703, G.704, G.706, G.732, G.775, G.796, G.823, G.964 (V5.1), G.965 (V5.2) and I.431. It also supports ETSI ETS 300 011, ETS 300 166, ETS 300 233, ETS 300 324 (V5.1) and ETS 300 347 (V5.2).

特性 Features

• Combined T1/E1/J1 framer and LIU, with PLL and 3 HDLCs
• In T1/J1 mode the LIU can recover signals attenuated by up to 36 dB (at 772 kHz)
• In E1 mode the LIU can recover signals attenuated by up to 40 dB (at 1.024 MHz)
• Low jitter digital PLL (intrinsic jitter < 0.02UI)
• HDLCs can be assigned to any timeslot
• Comprehensive alarm detection, performance monitoring and error insertion functions
• 2.048 Mbit/s or 8.192 Mbit/s ST-BUS streams
• Support for Inverse Mux for ATM (IMA)
• Support for V5.1 and V5.2 Access Networks
• 3.3 V operation with 5 V tolerant inputs
• Intel or Motorola non-multiplexed 8-bit microprocessor port
• JTAG boundary scanApplications
• T1/E1/J1 add/drop multiplexers
• Access networks
• Wireless base stations
• CO and CPE equipment interfaces
• Primary rate ISDN nodes
• Digital Cross-connect Systems (DCS)

简介

MT9076B属于集成电路（IC）的电信。由制造生产的MT9076B电信电信接口集成电路 (IC) 为通信网络接口提供特定功能和控制，例如以太网切换、线路驱动器、ISDN、放大器、通道扩展器、数字锁相环、DTMF、音频发生器和解码器、回声消除、检测器和发生器、DDA、电话线路监控器和主叫号码标识。