MPC17529EJ

0.7 A Dual H-Bridge Motor Driver with 3.0V/5.0V Compatible Logic I/O

Features •LowtotalRDS(on)0.7Ω(typ),1.2Ω(max)at25°C •Outputcurrent0.7A(DC),1.4A(peak) •Shoot-throughcurrentprotectioncircuit •3.0V/5.0VCMOS-compatibleinputs •PWMcontrolinputfrequencyupto200kHz •Built-inchargepumpcircuit •Lowpowerconsumption •Undervoltage

MPC17529EJ

H-Bridge, Dual, Low Voltage, Stepper & DC Brushed Motor Driver, 2-6.8V, 1.4A, 200kHz, TSSOP-EP; •Low RDS(ON) 0.7 Ohm(typ)\n•Output current 700 mA (DC), 1.4 A (Peak)\n•Shoot through current protection circuit\n•PWM control input frequency 200 kHz•Charge pump circuit\n•Four output control modes: Forward, Reverse, Brake, Tri-state (Open) and low ON Resistance of 1.2 Ohm(max)\n;

The NXP® MPC17529 is a monolithic dual H-Bridge IC that is ideal for portable electronic applications to control bipolar stepper motors and Brush DC-motors, such as in camera lens shutters, optical disk drives and other head positioners.\nEnable and tri-state bridge control via a parallel MCU interface (3 and 5 V compatible logic)\nOn-board charge pump, and built-in shoot through current protection and undervoltage detector to avoid malfunction\nCan drive various type of micro motor with low loss via parallel drive because each section has efficient drivers for PWM control frequency up to 200kHz for high speed drive and independent input/output circuitry\n

MPC17529EL

0.7ADualH-BridgeMotorDriverwith3.0V/5.0VCompatibleLogicI/O

Features •LowtotalRDS(on)0.7Ω(typ),1.2Ω(max)at25°C •Outputcurrent0.7A(DC),1.4A(peak) •Shoot-throughcurrentprotectioncircuit •3.0V/5.0VCMOS-compatibleinputs •PWMcontrolinputfrequencyupto200kHz •Built-inchargepumpcircuit •Lowpowerconsumption •Undervoltage

MPC17529EL

0.7ADualH-BridgeMotorDriverwith3.0V/5.0VCompatibleLogicI/O

0.7ADualH-BridgeMotorDriverwith3.0V/5.0VCompatibleLogicI/O The17529isamonolithicdualH-BridgepowerICidealforportableelectronicapplicationscontainingbipolarstepmotorsand/orbrushDC-motors(e.g.,camerasanddiskdriveheadpositioners). The17529operatesfrom2.0Vto

MPC17529EV

0.7ADualH-BridgeMotorDriverwith3.0V/5.0VCompatibleLogicI/O

Features •LowtotalRDS(on)0.7Ω(typ),1.2Ω(max)at25°C •Outputcurrent0.7A(DC),1.4A(peak) •Shoot-throughcurrentprotectioncircuit •3.0V/5.0VCMOS-compatibleinputs •PWMcontrolinputfrequencyupto200kHz •Built-inchargepumpcircuit •Lowpowerconsumption •Undervoltage

MPC17529EV

0.7ADualH-BridgeMotorDriverwith3.0V/5.0VCompatibleLogicI/O

0.7ADualH-BridgeMotorDriverwith3.0V/5.0VCompatibleLogicI/O The17529isamonolithicdualH-BridgepowerICidealforportableelectronicapplicationscontainingbipolarstepmotorsand/orbrushDC-motors(e.g.,camerasanddiskdriveheadpositioners). The17529operatesfrom2.0Vto

MPC17529EV

0.7ADualH-BridgeMotorDriverwith3.0V/5.0VCompatibleLogicI/O

The17529isamonolithicdualH-BridgepowerICidealforportableelectronicapplicationscontainingbipolarstepmotorsand/orbrushDC-motors(e.g.,camerasanddiskdriveheadpositioners). The17529operatesfrom2.0Vto6.8V,withindependentcontrolofeachH-BridgeviaparallelMCUint

MPC17529EVEL

0.7ADualH-BridgeMotorDriverwith3.0V/5.0VCompatibleLogicI/O

The17529isamonolithicdualH-BridgepowerICidealforportableelectronicapplicationscontainingbipolarstepmotorsand/orbrushDC-motors(e.g.,camerasanddiskdriveheadpositioners). The17529operatesfrom2.0Vto6.8V,withindependentcontrolofeachH-BridgeviaparallelMCUint

MPC17529EVSLASHEL

0.7ADualH-BridgeMotorDriverwith3.0V/5.0VCompatibleLogicI/O

Features •LowtotalRDS(on)0.7Ω(typ),1.2Ω(max)at25°C •Outputcurrent0.7A(DC),1.4A(peak) •Shoot-throughcurrentprotectioncircuit •3.0V/5.0VCMOS-compatibleinputs •PWMcontrolinputfrequencyupto200kHz •Built-inchargepumpcircuit •Lowpowerconsumption •Undervoltage